Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ECCOBOND EN 3521F 70CC
- Product Code
- 2394577
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
1-c- epoxide adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epoxy resin | --- | 30 - 60% | Yes |
| Epoxy resin | --- | 30 - 60% | Yes |
| Epoxy-silicone polymer | --- | 10 - 30% | Yes |
| Reaction mass of 2-ethyl-4-methyl-1H-imidazole-1-propiononitrile and 2-ethyl-5-methyl-1H-imidazole-1-propiononitrile | 568591-00-4 | 5 - 10% | Yes |
| Epoxy resin | --- | 1 - 5% | Yes |
| Substituted silane | --- | 1 - 5% | Yes |
| Epoxy resin | --- | 0.1 - 1% | Yes |
| Carbon black - Nano | 1333-86-4 | 0.1 - 1% | Yes |
| Methanol | 67-56-1 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
This product is combustible at high temperatures. Dust accumulation from this product may present an explosion hazard in the presence of an ignition source. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Sweep up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ECCOBOND EN 3915T 55CCX
---
LOCTITE ECCOBOND FP0097 30CC
---
LOCTITE ECCOBOND FP4802 10CCMU
---
LOCTITE ECCOBOND LCM 1000AF
---
LOCTITE ECCOBOND UF 3808 50MLX
---
LOCTITE ECCOBOND FP4549 10MLX
---
LOCTITE ECCOBOND FP4520 30ML
---
LOCTITE ABLESTIK CE 3513 known as ECCOBOND CE 3513 400 G
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wear suitable protective clothing, safety glasses and gloves. Keep container tightly sealed.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling. When using do not eat, drink or smoke.
Reduce all potential of static electrical discharge through bonding and grounding. Do not handle or store near an open flame, heat or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
High temperatures. Store away from incompatible materials. Heat, flames, sparks and other sources of ignition. Direct sunlight. Humidity. Avoid dust formation.
Strong oxidizing agents. Strong acids and strong bases. Avoid contact with amines and mercaptans. Strong alkalis. Strong Lewis acids. Acid anhydrides.
Oxides of carbon. Oxides of nitrogen. Hydrocarbons. Ammonia. Oxides of silicon. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ECCOBOND EN 3521F 70CC?
The signal word is warning.
What is the physical form of LOCTITE ECCOBOND EN 3521F 70CC?
LOCTITE ECCOBOND EN 3521F 70CC is a liquid with black color. It has mild odor.
What is LOCTITE ECCOBOND EN 3521F 70CC used for?
1-c- epoxide adhesive
What are the hazard statements for LOCTITE ECCOBOND EN 3521F 70CC?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
What is the melting point of LOCTITE ECCOBOND EN 3521F 70CC?
The melting point is Not available. and the boiling point is Not available..