Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT
- Product Code
- 490821
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Conversion coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium xylene sulfonate | 1300-72-7 | 1 - 5% | No |
| Phenol phosphate ester | 39464-70-5 | 1 - 5% | No |
| sodium 3-nitrobenzenesulphonate | 127-68-4 | 1 - 5% | No |
| Fatty alcohol C8-10 ,EO-PO, benzylether | 68154-99-4 | 1 - 5% | No |
| Sodium chlorate | 7775-09-9 | 0.1 - 1% | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes. If eye irritation persists, consult a specialist.
Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-FE GS 755 IRON PHOSPHATE known as PREP-N-COTE GS 755
---
BONDERITE® C-M-ED 50002 P2
---
BONDERITE C-NE 3300
---
BONDERITE C-IC A-500 DEOXIDIZER
---
BONDERITE M-FE 10100
---
BONDERITE M-ZN 1421-A R ZINC PHOSPHATE
---
BONDERITE M-ZN 2030 R MU ZINC PHOSPHATE
---
BONDERITE M-MN LT-10 R V MANGANESE PHOSPHATE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not take internally. Wash thoroughly after handling. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Chemical resistant, impermeable gloves. Gloves should be tested to determine suitability for prolonged contact.
Wear chemical goggles; face shield (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Store away from incompatible materials.
This product may react with strong oxidizing agents. This product may react with strong reducing agents. Do not mix this chemical or solutions of this chemical with hydrochloric acid (muriatic acid). May liberate chlorine gas.
Upon decomposition, this product emits oxides of sulfur, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of phosphorus.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT?
The signal word is danger.
What is the physical form of BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT?
BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT is a liquid with yellow color. It has mild odor.
What is the solubility of BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT?
Complete Water
What is BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT used for?
Conversion coating
What are the hazard statements for BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT?
This substance has 1 hazard statement:
- H318: CAUSES SERIOUS EYE DAMAGE.
What is the melting point of BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT?
The melting point is 17 °F (-8.3 °C) and the boiling point is >210 °F (>98.9 °C).