Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-FE 267 IRON PHOSPHATE known as FOSBOND 267
- Product Code
- 611365
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Conversion coating
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium xylene sulfonate | 1300-72-7 | 1 - 5% | Yes |
| Diethylene glycol monobutyl ether | 112-34-5 | 1 - 5% | Yes |
| Phosphoric acid | 7664-38-2 | 1 - 5% | Yes |
| 4-Nonylphenol, branched | --- | 1 - 5% | Yes |
| Fatty alcohol C8-10 ,EO-PO, benzylether | 68154-99-4 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
For skin contact, flush with large amounts of water. Seek immediate medical attention. Remove contaminated clothing and footwear.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-FE 1020 IRON PHOSPHATE
---
BONDERITE M-FE 3315 IRON PHOSPHATE known as BONDERITE 3315
---
BONDERITE M-FE 902 R A IRON PHOSPHATE
---
BONDERITE M-FE 3990 DR 1000KG IRON PHOSPHATE
---
BONDERITE M-FE GS 755 IRON PHOSPHATE known as PREP-N-COTE GS 755
---
BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT
---
BONDERITE M-FE 3990 IRON PHOSPHATE known as DURIDINE 3990 30KG
---
BONDERITE M-FE 10100
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing mists or aerosols of this product. Wash thoroughly after handling. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong reducing agents.
Will not occur.
Store away from incompatible materials.
Strong oxidizing agents. Do not mix this chemical or solutions of this chemical with hydrochloric acid (muriatic acid). May liberate chlorine gas.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-FE 267 IRON PHOSPHATE known as FOSBOND 267?
The signal word is warning.
What is the physical form of BONDERITE M-FE 267 IRON PHOSPHATE known as FOSBOND 267?
BONDERITE M-FE 267 IRON PHOSPHATE known as FOSBOND 267 is a liquid with white color. It has mild odor.
What is the solubility of BONDERITE M-FE 267 IRON PHOSPHATE known as FOSBOND 267?
Complete Water
What is BONDERITE M-FE 267 IRON PHOSPHATE known as FOSBOND 267 used for?
Conversion coating
What are the hazard statements for BONDERITE M-FE 267 IRON PHOSPHATE known as FOSBOND 267?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE M-FE 267 IRON PHOSPHATE known as FOSBOND 267?
The melting point is Not determined and the boiling point is > 212 °F (> 100°C)calculated.