Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-FE 902 R A IRON PHOSPHATE
- Product Code
- 594375
- Synonyms
- BONDERITE 902 REPL A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium chlorate | 7775-09-9 | 10 - 30% | Yes |
| Phosphoric acid | 7664-38-2 | 5 - 10% | Yes |
| Sodium hydroxide | 1310-73-2 | 1 - 5% | Yes |
| Sodium nitrate | 7631-99-4 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-FE 1020 IRON PHOSPHATE
---
BONDERITE M-FE 3990 DR 1000KG IRON PHOSPHATE
---
BONDERITE M-FE 3315 IRON PHOSPHATE known as BONDERITE 3315
---
BONDERITE M-FE 267 IRON PHOSPHATE known as FOSBOND 267
---
BONDERITE M-FE GS 755 IRON PHOSPHATE known as PREP-N-COTE GS 755
---
BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT
---
BONDERITE M-FE 3990 IRON PHOSPHATE known as DURIDINE 3990 30KG
---
BONDERITE M-FE 10100
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. For industrial use only. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong alkalies. Do not mix this chemical or solutions of this chemical with hydrochloric acid (muriatic acid). May liberate chlorine gas. Do not allow chemical to dry in the presence of organic materials.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3098
- Shipping Name
- Oxidizing liquid, corrosive, n.o.s. (Sodium chlorate, Phosphoric acid)
- Transport Class
- 5.1 (8)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE M-FE 902 R A IRON PHOSPHATE known by?
BONDERITE M-FE 902 R A IRON PHOSPHATE is also known as: BONDERITE 902 REPL A
What is the hazard signal word for BONDERITE M-FE 902 R A IRON PHOSPHATE?
The signal word is danger.
What is the physical form of BONDERITE M-FE 902 R A IRON PHOSPHATE?
BONDERITE M-FE 902 R A IRON PHOSPHATE is a liquid with colorless / colorless color. It has odourless / odorless odor.
What is the solubility of BONDERITE M-FE 902 R A IRON PHOSPHATE?
Complete Water
What is BONDERITE M-FE 902 R A IRON PHOSPHATE used for?
Coating
What are the hazard statements for BONDERITE M-FE 902 R A IRON PHOSPHATE?
This substance has 4 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H290: MAY BE CORROSIVE TO METALS.
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE M-FE 902 R A IRON PHOSPHATE?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F).