LOCTITE AA 3937 SY

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.

Rinse with running water and soap. Remove contaminated clothing and shoes. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated. If symptoms develop and persist, get medical attention.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.

Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.

Water spray (fog), foam, dry chemical or carbon dioxide.

Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.

Keep unnecessary personnel away.

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Do not allow product to enter sewer or waterways. Prevent further leakage or spillage if safe to do so.

Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wear suitable protective clothing, safety glasses and gloves.

Keep container tightly closed and in a cool, well-ventilated place. Maintain head space in storage containers to support oxygen requirements of the inhibitor(s).

Wash thoroughly after handling.

Keep away from heat, spark and flame.

Stable under normal conditions of storage and use.

Not available.

May occur with excessive aging, excessive heat, polymerization catalyst, inhibitor depletion, direct sunlight and under oxygen-free atmospheres.

Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. UV light. Loss of polymerization inhibitor. Loss of dissolved air.

Strong oxidizing agents. Strong reducing agents. Acids and bases. Amines. Mercaptans. Peroxides. Free radical initiators. Inert gases. Oxygen scavengers. Reactive metals.

Oxides of carbon. Oxides of nitrogen. Oxides of silicon. Toxic fumes. Irritating vapors.