Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM F 4768 STAMPING LUBRICANT ACHESON
- Synonyms
- MULTAN F 4768
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
CHEMTREC
1-703-527-3887
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Triethanolamine | 102-71-6 | 10 - 30% | Yes |
| Oleic acid, compound with 2,2',2''-nitrilotriethanol (1:1) | 2717-15-9 | 10 - 30% | Yes |
| dodecanedioic acid, compound with 2,2',2''-nitrilotriethanol | 85049-97-4 | 5 - 10% | Yes |
| Benzotriazole | 95-14-7 | 0.1 - 1% | Yes |
| Benzotriazol, ar-methyl-, reaction product with formaldehyde and Diethanolamine | --- | 0.1 - 1% | Yes |
| Diethanolamine | 111-42-2 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Flush with large amounts of water.
Rinse immediately with plenty of water for 15 minutes.
Contact a physician or poison control center. Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation/skin). Seek immediate medical attention (eyes). Immediately contact a physician or poison control center (ingestion).
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM 235 FORMING LUBRICANT ACHESON
---
BONDERITE L-FM PL-A POST LUBRICANT ACHESON
---
BONDERITE L-FM F 1009 FORMING LUBRICANT ACHESON
---
BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON
---
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
BONDERITE L-FM 909 R FORMING LUBRICANT ACHESON
---
BONDERITE L-FM F P 1212 AN STAMPING LUBRICANT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin and eye contact. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. Avoid contact with skin and clothing. Do not take internally. For industrial use only.
Not available.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Freezing conditions.
Not available.
Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE L-FM F 4768 STAMPING LUBRICANT ACHESON known by?
BONDERITE L-FM F 4768 STAMPING LUBRICANT ACHESON is also known as: MULTAN F 4768
What is the hazard signal word for BONDERITE L-FM F 4768 STAMPING LUBRICANT ACHESON?
The signal word is warning.
What is the physical form of BONDERITE L-FM F 4768 STAMPING LUBRICANT ACHESON?
BONDERITE L-FM F 4768 STAMPING LUBRICANT ACHESON is a liquid with amber color. It has mild odor.
What is the solubility of BONDERITE L-FM F 4768 STAMPING LUBRICANT ACHESON?
Disperses in water as emulsion Water
What is BONDERITE L-FM F 4768 STAMPING LUBRICANT ACHESON used for?
Lubricant
What are the hazard statements for BONDERITE L-FM F 4768 STAMPING LUBRICANT ACHESON?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-FM F 4768 STAMPING LUBRICANT ACHESON?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F)calculated.