Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Loctite Super Bonder Remover
- Product Code
- 2789674
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Henkel Corporation
860.571.5100
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propylene carbonate | 108-32-7 | 80 - 100% | Yes |
IDH number: 2789674 Product name: Loctite Super Bonder Remover
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, consult doctor if complaint persists.
Rinse with running water and soap. Skin care. Remove contaminated clothes immediately.
Immediately flush eyes with soft jet of water or eye rinse solution for at least 5 minutes. If pains remain, continue flushing and contact/seek doctor or hospital.
Symptoms: intensive smarting, sensitivity to light, visual disturbance
Rinse mouth and throat. Drink 1-2 glasses of water. Seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, powder, water spray jet, fine water spray
High pressure waterjet
In the event of a fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx) can be released.
Wear protective equipment. Wear self-contained breathing apparatus.
Firefighter Protection
Wear protective equipment. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not empty into drains / surface water / ground water.
Remove with liquid-absorbing material (sand, peat, sawdust).
Materials: sand, peat, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not smoke, do not weld. Avoid skin and eye contact.
Ensure adequate ventilation. Store in sealed original container. Store in a dry place.
Avoid naked flames, sparking and sources of ignition. Switch off electrical devices. Avoid all sources of fire such as stoves and ovens. Switch off all electrical devices such as parabolic heaters, hot plates, storage heaters etc. in good time for them to have cooled down before commencing work. Avoid all sparks, including those occurring at electrical switches and devices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
None if used for intended purpose.
None if used for intended purpose.
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Loctite Super Bonder Remover?
The signal word is warning.
What is the physical form of Loctite Super Bonder Remover?
Loctite Super Bonder Remover is a gel-like with colourless / colorless to light yellow color. It has mild odor.
What is the solubility of Loctite Super Bonder Remover?
Partially soluble Water, Partially soluble Acetone
What are the hazard statements for Loctite Super Bonder Remover?
This substance has 1 hazard statement:
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of Loctite Super Bonder Remover?
The melting point is Not applicable, Product is a liquid and the boiling point is 242 °C (467.6 °F)242 °C (467.6 °F).