NextSDS Logo
Safety Data Sheet EN

Loctite SuperBond

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Loctite SuperBond
Product Form
Super glue
Product Code
2052418

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 4
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Repr. Cat. 1B
STOT SE Cat. 3

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H227 COMBUSTIBLE LIQUID.
H315 CAUSES SKIN IRRITATION.
H319 CAUSES SERIOUS EYE IRRITATION.
H335 MAY CAUSE RESPIRATORY IRRITATION.
H360 MAY DAMAGE FERTILITY OR THE UNBORN CHILD.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethyl 2-cyanoacrylate 7085-85-0 80 - 100% Yes
Bis(2-hydroxy-3-tert-butyl-5-methylphenyl)methane 119-47-1 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Not available.

Cleanup methods

Not available.

—

Related Products

Similar products with comparable safety profiles

L

Loctite SuperBond

---

L

LOCTITE SUPER GLUE

---

L

Loctite Super Glue Gel

---

L

Loctite Super Glue 3

---

L

Loctite Super Glue Professional

---

L

Loctite Super Glue Precision

---

L

Loctite(R) 409 SuperBonder(R) Instant Adhesive Gel

---

L

Loctite 7500

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Not available.

Storage

Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Fire prevention

Keep away from heat, sparks and open flame. Remove all sources of ignition. Ground and bond metal containers for liquid transfer to avoid static sparks.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colourless / Colorless
Colour Intensity
---
Form
---
Odor
Characteristic
Odor Threshold
Not available.
Ph
Not applicable, Product reacts with water.
Melting Point
Not applicable, Product is a liquid
Boiling Point
> 100 °C (> 212°F)
Flash Point
80 - 93 °C (176°F - 199.4 °F) no method / method unknown
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
2.5 hPa (50 °C (122°F)) < 0.2 mm hg (20 °C (68°F))
Vapor Density
---
Relative Density
1.05 - 1.1
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
Polymerises in presence of water. Water
Partition Coefficient
Not available.
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
Not available.
Metal Corrosion
---
Dynamic Viscosity
20 - 120 mPa.s
Kinematic Viscosity
45 - 275 mm2/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Not available.

Reactivity

Not available.

Hazardous reactions

Rapid exothermic polymerization will occur in the presence of water, amines, alkalis and alcohols.

Avoid

Heat, flames, sparks and other sources of ignition.

Incompatible

Not available.

Decomposition

Not available.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3334
Shipping Name
Aviation regulated liquid, n.o.s. (Cyanoacrylate ester)
Transport Class
9
Packing Group
III
IATA

Primary packs containing less than 500ml are unregulated by this mode of transport and may be shipped unrestricted.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Loctite SuperBond?

The signal word is danger.

What is the physical form of Loctite SuperBond?

Loctite SuperBond is a liquid with colourless / colorless color. It has characteristic odor.

What is the solubility of Loctite SuperBond?

Polymerises in presence of water. Water

What are the hazard statements for Loctite SuperBond?

This substance has 5 hazard statements:

  • H227: COMBUSTIBLE LIQUID.
  • H315: CAUSES SKIN IRRITATION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H335: MAY CAUSE RESPIRATORY IRRITATION.
  • H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.

What is the melting point of Loctite SuperBond?

The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212°F).