NextSDS Logo
Safety Data Sheet EN

BONDERITE C-IC BRIGHT ACID DEOXIDIZER known as NOVA BRIGHT DIP CONDI TIONER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-IC BRIGHT ACID DEOXIDIZER known as NOVA BRIGHT DIP CONDI TIONER
Product Code
771963

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Rust dissolver

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

OXIDIZING LIQUID Cat. 3
Met. Corr. Cat. 1
Acute Tox. Cat. 4
Skin Corr. Cat. 1B
Eye Dam. Cat. 1
Carc. Cat. 1A

GHS Pictograms

GHS03 - Oxidizing

GHS03

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H272 MAY INTENSIFY FIRE; OXIDIZER.
H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H332 HARMFUL IF INHALED.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P220 Keep away from clothing and other combustible materials.
P234 Keep only in original packaging.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P363 Wash contaminated clothing before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Phosphoric acid 7664-38-2 10 - 30% Yes
Ferric sulfate 10028-22-5 10 - 30% Yes
Sulfuric acid 7664-93-9 10 - 30% Yes
Nitric acid 7697-37-2 10 - 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Remove contaminated clothing and footwear. For skin contact, flush with large amounts of water. Seek immediate medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value. Treat the affected person appropriately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

May react with metals to form flammable hydrogen gas.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not take internally. Wash thoroughly after handling. For industrial use only. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store away from alkaline materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Pink
Colour Intensity
---
Form
---
Odor
Sour/Acid
Odor Threshold
Not available.
Ph
< 2.0
Melting Point
Not determined
Boiling Point
> 100 °C (> 212°F)calculated
Flash Point
Not applicable
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Vapor Pressure
Not determined
Vapor Density
---
Relative Density
1.50 - 1.54 at 20 °C (68°F)
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
Not applicable
Lower Explosive Limit
Not applicable
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
Not available.
Solubility
Complete
Partition Coefficient
Not determined
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
Not applicable
Metal Corrosion
---
Dynamic Viscosity
Not available.
Kinematic Viscosity
Not available.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Heat. Contact with most metals produces highly flammable hydrogen gas.

Incompatible

Keep away from organic, alkaline, and oxidizing materials, metallic powders, chromates, chlorates, nitrates, and carbides. Reaction with reducing agents.

Decomposition

Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of sulfur.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3264
Shipping Name
Corrosive liquid, acidic, inorganic, n.o.s. (Nitric acid, Sulfuric acid)
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-IC BRIGHT ACID DEOXIDIZER known as NOVA BRIGHT DIP CONDI TIONER?

The signal word is danger.

What is the physical form of BONDERITE C-IC BRIGHT ACID DEOXIDIZER known as NOVA BRIGHT DIP CONDI TIONER?

BONDERITE C-IC BRIGHT ACID DEOXIDIZER known as NOVA BRIGHT DIP CONDI TIONER is a liquid with pink color. It has sour/acid odor.

What is the solubility of BONDERITE C-IC BRIGHT ACID DEOXIDIZER known as NOVA BRIGHT DIP CONDI TIONER?

Complete

What is BONDERITE C-IC BRIGHT ACID DEOXIDIZER known as NOVA BRIGHT DIP CONDI TIONER used for?

Rust dissolver

What are the hazard statements for BONDERITE C-IC BRIGHT ACID DEOXIDIZER known as NOVA BRIGHT DIP CONDI TIONER?

This substance has 5 hazard statements:

  • H272: MAY INTENSIFY FIRE; OXIDIZER.
  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H332: HARMFUL IF INHALED.
  • H350: MAY CAUSE CANCER.

What is the melting point of BONDERITE C-IC BRIGHT ACID DEOXIDIZER known as NOVA BRIGHT DIP CONDI TIONER?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F)calculated.