Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK ATB 125_106 Known as LOCTITE ABLESTIK ATB 125 Adhesive
- Product Code
- 2362945
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Modified epoxy resin | --- | 60 - 80% | Yes |
| Epoxy resin | --- | 10 - 30% | Yes |
| dapsone | 80-08-0 | 5 - 10% | Yes |
| Siloxanes and Silicones, di-Me, reaction products with silica | 67762-90-7 | 1 - 5% | Yes |
| Substituted silane | --- | 1 - 5% | Yes |
| Epoxy resin | --- | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
If symptoms develop and persist, get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Sweep up or gather material and place in appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK ATB 125_206 Known as LOCTITE ABLESTIK ATB 125 Adhesive
---
LOCTITE ABLESTIK ATB 125GR2 12" X 25UM, 6140
---
LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140
---
LOCTITE ABLESTIK ATB 125HA8 12" X 25UM, PSA2
---
LOCTITE ABLESTIK ABL 2100A
---
LOCTITE ABLESTIK 104 PTB
---
LOCTITE ABLESTIK 2100AS
---
LOCTITE ABLESTIK ABP 8068TD
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Avoid contact with eyes, skin and clothing. Do not taste or swallow. Do not breathe gas/fumes/vapor/spray. Wash thoroughly after handling.
Keep the container tightly closed and in a cool, well-ventilated place.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Excessive heat. Exposure to sunlight. Store away from incompatible materials.
Strong reducing agents. Peroxides. Ammonia. Oxygen scavengers. Inert gases. Strong acids and strong bases. Strong oxidizing agents. Free radical initiators.
Oxides of carbon. Oxides of nitrogen. Hydrocarbons. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK ATB 125_106 Known as LOCTITE ABLESTIK ATB 125 Adhesive?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK ATB 125_106 Known as LOCTITE ABLESTIK ATB 125 Adhesive?
LOCTITE ABLESTIK ATB 125_106 Known as LOCTITE ABLESTIK ATB 125 Adhesive is a solid, film with clear color. It has mild odor.
What is the solubility of LOCTITE ABLESTIK ATB 125_106 Known as LOCTITE ABLESTIK ATB 125 Adhesive?
Insoluble Water
What are the hazard statements for LOCTITE ABLESTIK ATB 125_106 Known as LOCTITE ABLESTIK ATB 125 Adhesive?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE ABLESTIK ATB 125_106 Known as LOCTITE ABLESTIK ATB 125 Adhesive?
The melting point is Not available. and the boiling point is Not available..