Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK ATB 125GR2 12" X 25UM, 6140
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Die attach adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Si-oxide amorphous (fumed) | 7631-86-9 | 30 - 60% | Yes |
| Modified epoxy resin | --- | 10 - 30% | Yes |
| Bismaleimide resin | --- | 5 - 10% | Yes |
| Epoxy resin | --- | 5 - 10% | Yes |
| dapsone | 80-08-0 | 1 - 5% | Yes |
| Carbamide | --- | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If symptoms develop and persist, get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Sweep up or gather material and place in appropriate container for disposal.
Materials: appropriate container
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140
---
LOCTITE ABLESTIK ATB 125HA8 12" X 25UM, PSA2
---
LOCTITE ABLESTIK ATB 120MD6N 20UM X 12", PSA1
---
LOCTITE ABLESTIK ATB 107MD3N 12" X 7UM, PSA2
---
LOCTITE ABLESTIK ATB 110HB2U 8" X 10UM, UV2
---
LOCTITE ABLESTIK 5074 -125 12" X 20" SINGLE SH
---
LOCTITE ABLESTIK ATB 125_106 Known as LOCTITE ABLESTIK ATB 125 Adhesive
---
LOCTITE ABLESTIK ATB 125_206 Known as LOCTITE ABLESTIK ATB 125 Adhesive
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Refer to Section 8.
Store in a cool, dry, well-ventilated area. Store in original container until ready to use.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Excessive heat. Store away from incompatible materials.
Strong oxidizing agents. Strong reducing agents. Strong acids and strong bases. Alkalis. Isocyanates. Hydrogen peroxide.
Oxides of carbon. Oxides of nitrogen. Oxides of silicon. Oxides of sulfur. Formaldehyde Hydrocarbons. Hydrogen cyanide. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK ATB 125GR2 12" X 25UM, 6140?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK ATB 125GR2 12" X 25UM, 6140?
LOCTITE ABLESTIK ATB 125GR2 12" X 25UM, 6140 is a solid with light yellow color. It has odourless / odorless odor.
What is the solubility of LOCTITE ABLESTIK ATB 125GR2 12" X 25UM, 6140?
Insoluble
What is LOCTITE ABLESTIK ATB 125GR2 12" X 25UM, 6140 used for?
Die attach adhesive
What are the hazard statements for LOCTITE ABLESTIK ATB 125GR2 12" X 25UM, 6140?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE ABLESTIK ATB 125GR2 12" X 25UM, 6140?
The melting point is 70 - 145 °C (158°F - 293°F) and the boiling point is Not applicable, Determination technically not possible.