NextSDS Logo
Safety Data Sheet EN

LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140
Product Code
3146146

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Die attach adhesive

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.

Precautionary Statements

P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Butadiene, acrylonitrile polymer, carboxy-terminated, polymer with bisphenol A and epichlorohydrin 68610-41-3 10 - 30% Yes
Phenol, polymer with formaldehyde 9003-35-4 5 - 10% Yes
Epichlorohydrin-4,4'-isopropylidene diphenol resin 25068-38-6 1 - 5% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Skin contact

Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.

Eye contact

Immediately flush eyes with plenty of water for at least 15 minutes. If symptoms develop and persist, get medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.

Immediate Medical Attention

Get medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

In case of fire, keep containers cool with water spray.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Refer to Section 8 'Exposure Controls / Personal Protection' prior to clean up.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Scrape up spilled material and place in a closed container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear suitable protective clothing, gloves and eye/face protection. Avoid contact with eyes, skin and clothing. Do not breathe gas/fumes/vapor/spray. Keep container closed.

Storage

Store between 0 °C (32°F) and 5 °C (41°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep in a cool, well ventilated area away from heat, sparks and open flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Properties Status
---
Kinematic Viscosity
Not available.
Molecular Weight
---
Physical State Data
solid
Odor
---
Dynamic Viscosity
Not available.
Boiling Point
Not available.
Auto Ignition Temperature
Not available.
Appearance
Film
Bulk Density
---
Solubility In Water
Insoluble
Solubility
Insoluble Water
Vapor Density
---
Softening Point
---
Partition Coefficient
Not available.
State Under Standard Conditions
---
Solubility In Fat
---
Odor Threshold
Not available.
Explosive Limits
---
Evaporation Rate
Not available.
Upper Explosive Limit
Not available.
Density
---
Flash Point
Product is a solid
Physical State
Film
Solidification Point
---
Vapor Pressure
Not available.
Relative Density
1.1
Flammability
Not applicable
Metal Corrosion
---
Melting Point
Not available.
Colour
White
Ph
Not available.
Lower Explosive Limit
Not available.
Voc Content
0.3 % (calculated)
Relative Evaporation Rate
---
Form
---
Cloud Point
---
Freezing Point
---
Colour Intensity
---
Decomposition Temperature
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Excessive heat. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.

Incompatible

Strong oxidizing agents. Strong acids and strong bases. Alkalis. Amines.

Decomposition

Oxides of carbon. Oxides of nitrogen. Hydrocarbons. Phenolics. Aldehydes. Irritating vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
Environmentally hazardous substance, solid, n.o.s. (Epoxy resin)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140?

The signal word is warning.

What is the physical form of LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140?

LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140 is a film appearing as film with white color.

What is the solubility of LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140?

Insoluble Water

What is LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140 used for?

Die attach adhesive

What are the hazard statements for LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140?

This substance has 3 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.

What is the melting point of LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140?

The melting point is Not available. and the boiling point is Not available..