Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE 455 INSTANT ADHESIVE known as 455 Prism® Low Odor/Low Bloom
- Product Code
- 17421
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cyanoacrylate
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Beta-Methoxyethyl Cyanoacrylate | 27816-23-5 | 80 - 100% | Yes |
| Siloxanes and Silicones, di-Me, reaction products with silica | 67762-90-7 | 1 - 5% | Yes |
| Bis(2-hydroxy-3-tert-butyl-5-methylphenyl)methane | 119-47-1 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice. If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel.
Rinse with running water and soap. Do not pull bonded skin apart. It may be gently peeled apart using a blunt object such as a spoon, preferably after soaking in warm soapy water. If lips are accidentally stuck together apply warm water to the lips and encourage maximum wetting and pressure from saliva inside the mouth. Peel or roll lips apart. Do not try to pull the lips apart with direct opposing action. If symptoms develop and persist, get medical attention.
Symptoms: bonded skin, lips are accidentally stuck together
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately. Do not force eye open.
Symptoms: solid particles of cyanoacrylate trapped behind the eyelid cause any abrasive damage
Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person. Ensure breathing passages are not obstructed. Prevent the patient from swallowing any separated mass.
Symptoms: The product will polymerize rapidly and bond to the mouth making it almost impossible to swallow.
Immediate Medical Attention
Seek immediate medical attention.
Medical Treatment
Surgery is not necessary to separate accidentally bonded tissues. Experience has shown that bonded tissues are best treated by passive, non-surgical first aid. If rapid curing has caused thermal burns they should be treated symptomatically after adhesive is removed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures appropriate to local circumstances and the surrounding environment. Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways. Prevent further leakage or spillage if safe to do so.
Flood with water to complete polymerization and scrape off the floor.
Materials: Water
Related Products
Similar products with comparable safety profiles
LOCTITE 460 LOW ODOR AND LOW BLOOM known as 460 PRISM 500 G
---
LOCTITE 403 LOW ODOR/BLOOM known as 403 PRISM 20 G
---
LOCTITE 426 BLACK INSTANT ADHESIVE known as 426 Prism® Black Max® Gel Inst
---
LOCTITE 454 GEL ADHESIVE
UFI: MAK2-7WRP-G202-F235
LOCTITE 454 GEL ADHESIVE
---
LOCTITE 454 PRISM TUB 20 GR
---
LOCTITE 454
---
LOCTITE 415
UFI: QVU2-M0YK-300R-AQ3V
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed. See Section 8 of the SDS for Personal Protective Equipment. Avoid contact with fabric or paper goods. Contact with these materials may cause rapid polymerization which can generate smoke and strong irritating vapors, and cause thermal burns. When using, do not eat, drink or smoke.
Not available.
Wash thoroughly after handling. When using, do not eat, drink or smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
Rapid exothermic polymerization will occur in the presence of water, amines, alkalis and alcohols.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Store away from incompatible materials.
Water. Alcohols. Amines. Bases.
Oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (Cyanoacrylate ester)
- Transport Class
- Combustible Liquid
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE 455 INSTANT ADHESIVE known as 455 Prism® Low Odor/Low Bloom?
The signal word is danger.
What is the physical form of LOCTITE 455 INSTANT ADHESIVE known as 455 Prism® Low Odor/Low Bloom?
LOCTITE 455 INSTANT ADHESIVE known as 455 Prism® Low Odor/Low Bloom is a liquid with colorless / colorless color. It has odourless / odorless odor.
What is the solubility of LOCTITE 455 INSTANT ADHESIVE known as 455 Prism® Low Odor/Low Bloom?
Not available.
What is LOCTITE 455 INSTANT ADHESIVE known as 455 Prism® Low Odor/Low Bloom used for?
Cyanoacrylate
What are the hazard statements for LOCTITE 455 INSTANT ADHESIVE known as 455 Prism® Low Odor/Low Bloom?
This substance has 3 hazard statements:
- H227: COMBUSTIBLE LIQUID
- H320: CAUSES EYE IRRITATION
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD
What is the melting point of LOCTITE 455 INSTANT ADHESIVE known as 455 Prism® Low Odor/Low Bloom?
The melting point is Not available. and the boiling point is Not available..