Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM 727 R FORMING LUBRICANT ACHESON known as BONDERLUBE 727 R EPLENISHING
- Product Code
- 1231956
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium stearate | 822-16-2 | 10 - 30% | Yes |
| Octadecanoic acid | 57-11-4 | 10 - 30% | Yes |
| Lithium stearate | 4485-12-5 | 10 - 30% | Yes |
| Borax | 1330-43-4 | 5 - 10% | Yes |
| Calcium dihydroxide | 1305-62-0 | 1 - 5% | Yes |
| Sodium borofluoride | 13755-29-8 | 1 - 5% | Yes |
| Oils, pine | 8002-09-3 | 0.1 - 1% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove source of contamination or move victim to fresh air. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.
Symptoms: Delayed effects possible after inhalation.
Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.
Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Eye flushing should continue during transportation to a doctor.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
GET IMMEDIATE MEDICAL ATTENTION. If symptoms develop and persist, get medical attention.
Medical Treatment
Calcium hydroxide may react with moisture and protein in the eye and form clumps of moist compound, which are very difficult to remove. Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Sweep up or gather material and place in appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM PL-A POST LUBRICANT ACHESON
---
BONDERITE L-FM F 738 FORMING LUBRICANT ACHESON known as MULTAN F 738
---
BONDERITE L-FM 560 FORMING LUBRICANT
---
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
BONDERITE L-FG 1105 SYNTHETIC FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 180 ACHESON SYNTHETIC FORGING LUBRICANT
---
BONDERITE L-FG F 417M GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FM F 721 STAMPING LUBRICANT ACHESON known as MULTAN F 721
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing dust. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
Reaction with strong acids. Reactive metals.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Hydrogen fluoride. Oxides of boron.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FM 727 R FORMING LUBRICANT ACHESON known as BONDERLUBE 727 R EPLENISHING?
The signal word is danger.
What is the physical form of BONDERITE L-FM 727 R FORMING LUBRICANT ACHESON known as BONDERLUBE 727 R EPLENISHING?
BONDERITE L-FM 727 R FORMING LUBRICANT ACHESON known as BONDERLUBE 727 R EPLENISHING is a solid with white color. It has pine odor.
What is BONDERITE L-FM 727 R FORMING LUBRICANT ACHESON known as BONDERLUBE 727 R EPLENISHING used for?
Lubricant
What are the hazard statements for BONDERITE L-FM 727 R FORMING LUBRICANT ACHESON known as BONDERLUBE 727 R EPLENISHING?
This substance has 5 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE L-FM 727 R FORMING LUBRICANT ACHESON known as BONDERLUBE 727 R EPLENISHING?
The melting point is Not available. and the boiling point is Not applicable.