Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 96 AUTODEPOSITION ADDITIVE known as AQUENCE 96 REGENERANT
- Product Code
- 1010043
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hydrochloric acid | 7647-01-0 | 30 - 60
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrochloric acid | 7647-01-0 | 30 - 60% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
For skin contact, flush with large amounts of water. Seek immediate medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 24 AUTODEPOSITION ADDITIVE known as AQUENCE 24 OXIDIZER
---
BONDERITE M-PP 866 R AUTODEPOSITION PAINT known as AQUENCE 866 REPLENISHER
---
BONDERITE M-AD 4977B PRETREATMENT ADDITIVE known as ADDITIVE 4977B
---
BONDERITE M-AD 1 PRETREATMENT ADDITIVE known as ADDITIVE 1
---
BONDERITE M-AD 315 PRETREATMENT ADDITIVE known as ADDITIVE 315
---
BONDERITE M-AD 2 PRETREATMENT ADDITIVE known as PARCO ADDITIVE 2
---
BONDERITE M-AD 426 PRETREATMENT ADDITIVE known as BONDERITE M-AD 426
---
BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. Provide adequate ventilation. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong alkalies.
None under normal processing.
Store away from incompatible materials.
Will cause some corrosion to copper alloys and aluminum. Sulfuric acid.
Upon decomposition, this product emits oxides of sulfur, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1789
- Shipping Name
- Hydrochloric acid solution
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-AD 96 AUTODEPOSITION ADDITIVE known as AQUENCE 96 REGENERANT?
The signal word is danger.
What is the physical form of BONDERITE M-AD 96 AUTODEPOSITION ADDITIVE known as AQUENCE 96 REGENERANT?
BONDERITE M-AD 96 AUTODEPOSITION ADDITIVE known as AQUENCE 96 REGENERANT is a liquid with colorless / colorless color. It has acidic odor.
What is the solubility of BONDERITE M-AD 96 AUTODEPOSITION ADDITIVE known as AQUENCE 96 REGENERANT?
Complete Water
What is BONDERITE M-AD 96 AUTODEPOSITION ADDITIVE known as AQUENCE 96 REGENERANT used for?
Coating
What are the hazard statements for BONDERITE M-AD 96 AUTODEPOSITION ADDITIVE known as AQUENCE 96 REGENERANT?
This substance has 2 hazard statements:
- H290: MAY BE CORROSIVE TO METALS.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE M-AD 96 AUTODEPOSITION ADDITIVE known as AQUENCE 96 REGENERANT?
The melting point is Not determined and the boiling point is 252 °F (122.2 °C).