NextSDS Logo
Safety Data Sheet EN

BONDERITE M-AD 140 known as AQUENCE 140 OXIDIZER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-AD 140 known as AQUENCE 140 OXIDIZER
Product Code
1164791

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Auxiliary product

Uses advised against

None identified

Manufacturers & Suppliers

Henkel logo

Henkel

manufacturer

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

OXIDIZING LIQUID Cat. 2
Acute Tox. Cat. 4
Skin Corr. Cat. 1B
Eye Dam. Cat. 1
STOT SE Cat. 3

GHS Pictograms

GHS03 - Oxidizing

GHS03

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H272 MAY INTENSIFY FIRE; OXIDIZER.
H302 HARMFUL IF SWALLOWED.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H335 MAY CAUSE RESPIRATORY IRRITATION.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
Keep away from clothing and other combustible materials.
IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell. Rinse mouth.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

hydrogen peroxide solution 30 - 60 %

Chemical Name CAS Number Concentration Hazardous
hydrogen peroxide solution 7722-84-1 30 - 60% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Get immediate medical attention. Treat the affected person appropriately.

Medical Treatment

A nasogastric or orogastric tube may be required for the reduction of severe distension due to gas formation.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

This product is an oxidizing agent and is a serious fire and explosion risk. Do not permit contact with combustible, organic, or other oxidizable materials.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing mists or aerosols of this product. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

Fire prevention

Remove all sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colorless / Colorless
Colour Intensity
---
Form
---
Odor
Slight
Odor Threshold
Not available.
Ph
2.0 - 3.0
Melting Point
-26 °C (-14.8 °F) calculated
Boiling Point
106 °C (222.8 °F) calculated
Flash Point
Not applicable
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Vapor Pressure
24 mm hg (20 °C (68°F)) Supplier method
Vapor Density
---
Relative Density
1.1 at 25 °C (77°F)
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
Not applicable
Lower Explosive Limit
Not applicable
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
Not available.
Solubility
Complete Water
Partition Coefficient
Not determined
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
0 % (calculated)
Metal Corrosion
---
Dynamic Viscosity
Not available.
Kinematic Viscosity
Not available.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids, bases and oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2014
Shipping Name
Hydrogen peroxide, aqueous solution
Transport Class
5.1 (8)
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE M-AD 140 known as AQUENCE 140 OXIDIZER?

The signal word is danger.

What is the physical form of BONDERITE M-AD 140 known as AQUENCE 140 OXIDIZER?

BONDERITE M-AD 140 known as AQUENCE 140 OXIDIZER is a liquid with colorless / colorless color. It has slight odor.

What is the solubility of BONDERITE M-AD 140 known as AQUENCE 140 OXIDIZER?

Complete Water

What is BONDERITE M-AD 140 known as AQUENCE 140 OXIDIZER used for?

Auxiliary product

What are the hazard statements for BONDERITE M-AD 140 known as AQUENCE 140 OXIDIZER?

This substance has 4 hazard statements:

  • H272: MAY INTENSIFY FIRE; OXIDIZER.
  • H302: HARMFUL IF SWALLOWED.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H335: MAY CAUSE RESPIRATORY IRRITATION.

What is the melting point of BONDERITE M-AD 140 known as AQUENCE 140 OXIDIZER?

The melting point is -26 °C (-14.8 °F) calculated and the boiling point is 106 °C (222.8 °F) calculated.