NextSDS Logo
Safety Data Sheet EN

BONDERITE C-IC 79 AERO ACID CLEANER known as METALPREP 79

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-IC 79 AERO ACID CLEANER known as METALPREP 79
Product Code
594305

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 4 H227
Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1C H314
Eye Dam. Cat. 1 H314

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H227 COMBUSTIBLE LIQUID.
H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P234 Keep only in original packaging.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P390 Absorb spillage to prevent material damage.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Phosphoric acid 7664-38-2 10 - 30% Yes
2-Butoxyethanol 111-76-2 10 - 30% Yes
Diethylene glycol monobutyl ether 112-34-5 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air.

Skin contact

Flush with large amounts of water.

Eye contact

Rinse immediately with plenty of water.

Ingestion

Do not induce vomiting.

Immediate Medical Attention

Seek medical attention if symptoms develop or persist (inhalation). Obtain medical attention if irritation persists (skin). Seek medical advice (eye). Get immediate medical attention (ingestion).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

Fire and explosion hazards are moderate when this product is exposed to heat or flame.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Remove all sources of ignition. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. For industrial use only. Do not take internally.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.

Hygiene

Wash thoroughly after handling.

Fire prevention

Do not handle or store near an open flame, heat or other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
79.4 °C (174.92 °F) Tagliabue closed cup
Decomposition Temperature
Not available.
Metal Corrosion
---
Explosive Limits
---
Molecular Weight
---
Auto Ignition Temperature
Not determined
Vapor Pressure
Not determined
Relative Density
1.15 - 1.18
Upper Explosive Limit
Not determined
Crystallisation Point
---
Physical State
Liquid
Vapor Density
---
Density
---
Solubility In Water
---
Kinematic Viscosity
Not available.
Appearance
---
Odor Threshold
Not available.
Lower Explosive Limit
Not determined
Softening Point
---
Boiling Point
> 93.3 °C (> 199.9 °F)
Bulk Density
---
Solubility
Complete
Cloud Point
---
Colour Intensity
---
State Under Standard Conditions
---
Melting Point
14 °F (-10°C) Approximately
Properties Status
---
Relative Evaporation Rate
---
Solidification Point
---
Odor
Solvent
Solubility In Fat
---
Evaporation Rate
Not available.
Form
---
Flammability
Not applicable
Freezing Point
---
Voc Content
201 g/l
Dynamic Viscosity
Not available.
Partition Coefficient
Not determined
Ph
< 1
Colour
Blue
Physical State Data
liquid
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Heat, flames, sparks and other sources of ignition.

Incompatible

This product may react with strong oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1805
Shipping Name
Phosphoric acid solution
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-IC 79 AERO ACID CLEANER known as METALPREP 79?

The signal word is danger.

What is the physical form of BONDERITE C-IC 79 AERO ACID CLEANER known as METALPREP 79?

BONDERITE C-IC 79 AERO ACID CLEANER known as METALPREP 79 is a liquid with blue color. It has solvent odor.

What is the solubility of BONDERITE C-IC 79 AERO ACID CLEANER known as METALPREP 79?

Complete

What is BONDERITE C-IC 79 AERO ACID CLEANER known as METALPREP 79 used for?

Cleaner

What are the hazard statements for BONDERITE C-IC 79 AERO ACID CLEANER known as METALPREP 79?

This substance has 3 hazard statements:

  • H227: COMBUSTIBLE LIQUID.
  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE C-IC 79 AERO ACID CLEANER known as METALPREP 79?

The melting point is 14 °F (-10°C) Approximately and the boiling point is > 93.3 °C (> 199.9 °F).