Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805
- Product Code
- 1332821
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyvinyl chloride | 9002-86-2 | 10 - 30% | No |
| Phthalic acid, di(C9-11)alkylester, branched, C10-rich | 68515-49-1 | 10 - 30% | No |
| Limestone | 1317-65-3 | 10 - 30% | No |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 5 - 10% | No |
| Aluminium oxide - non fibrous form | 1344-28-1 | 1 - 5% | No |
| C,C'-azodi(formamide) | 123-77-3 | 0.1 - 1% | No |
| Sodium dodecyl sulphate | 151-21-3 | 0.1 - 1% | No |
| Methacrylic acid, zinc salt | 13189-00-9 | 0.1 - 1% | No |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
DO NOT induce vomiting unless directed to do so by medical personnel.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
None identified.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
TEROSON RB 3222 ANTI-FLUTTER known as TEROSTAT 3222
---
TEROSON RB 3211-2F-01 ANTI-FLUTTER known as TEROSTAT 3211-2F-01
---
TEROSON PV 1805 known as TEROSTAT 1805 (WSSM 4G348 A3)
---
TEROSON PU 8511 GLASSPRIMER known as TEROSTAT 8511 GLASPRIMER
---
TEROSON PV 4000.5 known as TEROSTAT 4000.5 (MS-CD 473B)
---
TEROSON RB 10104 (CN15N45138AB) known as TEROSTAT® 10101
---
TEROSON PU 8590 UHV known as TEROSTAT 8590 UHV SP 600ML
---
TEROSON PV 1095 C PAINT SHOP SEALANT known as TEROLAN SA-1095C
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Do not take internally. For industrial use only.
Store between 50°F and 80°F. (10° and 27°C) Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Heat, flames, sparks and other sources of ignition.
This product may react with strong oxidizing agents. This product may react with strong reducing agents.
Heat and processing may result in the release of low levels of vinyl chloride. Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805?
The signal word is danger.
What is the physical form of TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805?
TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805 is a liquid with black color. It has mild odor.
What is the solubility of TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805?
practically insoluble Water
What is TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805 used for?
Sealant
What are the hazard statements for TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805?
This substance has 5 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H350: MAY CAUSE CANCER.
What is the melting point of TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805?
The melting point is Not available. and the boiling point is 300 °F (148.9 °C)Supplier method.