Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON PV 351-2B ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-351-2B TMM
- Product Code
- 919690
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
adhesive and sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 30 - 60% | Yes |
| Disononyl phthalate | 28553-12-0 | 30 - 60% | Yes |
| Calcium carbonate | 471-34-1 | 10 - 30% | Yes |
| Polyvinyl chloride | 9002-86-2 | 1 - 5% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 1 - 5% | Yes |
| Distillates (petroleum), hydrotreated heavy paraffinic (not cmr) | 64742-54-7 | 1 - 5% | Yes |
| Titanium dioxide | 13463-67-7 | 1 - 5% | Yes |
| Calcium oxide | 1305-78-8 | 1 - 5% | Yes |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 0.1 - 1% | Yes |
| C,C'-azodi(formamide) | 123-77-3 | 0.1 - 1% | Yes |
| Sodium dodecyl sulphate | 151-21-3 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air.
Immediately flush skin with plenty of water (using soap, if available).
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open.
Do not induce vomiting.
Immediate Medical Attention
Seek medical attention at once. Get immediate medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
This product is combustible at high temperatures.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal. Surfaces may become slippery after spillage.
Materials: inert material
Related Products
Similar products with comparable safety profiles
TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805
---
TEROSON PV 4510 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-4510 (MS-CD 470F)
---
TEROSON PV 4510 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-4510 MS-CD 470F
---
TEROSON PV 1273 ANTI-FLUTTER ADHESIVE known as TEROSTAT 06-1273
---
TEROSON RB 491 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-491 adhesive and sealant
---
TEROSON PV 1805 ANTI-FLUTTER ADHESIVE
---
TEROSON PV 351-2B TMM known as TEROSTAT SA-351-2B TMM
---
TEROSON RB 3211-2F-01 ANTI-FLUTTER known as TEROSTAT 3211-2F-01
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Provide adequate ventilation. Do not take internally. For industrial use only.
Storage at 10 to 30°C is recommended. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Do not handle or store near an open flame, heat or other sources of ignition.
Wash thoroughly after handling.
Do not handle or store near an open flame, heat or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Heat, flames, sparks and other sources of ignition.
This product reacts with acids. This product may react with oxidizing agents.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Heat and processing may result in the release of low levels of vinyl chloride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON PV 351-2B ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-351-2B TMM?
The signal word is danger.
What is the physical form of TEROSON PV 351-2B ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-351-2B TMM?
TEROSON PV 351-2B ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-351-2B TMM is a liquid with white color. It has mild odor.
What is TEROSON PV 351-2B ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-351-2B TMM used for?
adhesive and sealant
What are the hazard statements for TEROSON PV 351-2B ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-351-2B TMM?
This substance has 4 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H350: MAY CAUSE CANCER.
What is the melting point of TEROSON PV 351-2B ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-351-2B TMM?
The melting point is Not applicable and the boiling point is 149 °C (300.2 °F).