Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON RB 491 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-491 adhesive and sealant
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067, United States
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 30 - 60% | Yes |
| Styrene butadiene divinylbenzene copolymer | 26471-45-4 | 1 - 5% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 1 - 5% | Yes |
| Calcium oxide | 1305-78-8 | 1 - 5% | Yes |
| Propylidynetrimethyl trimethacrylate | 3290-92-4 | 0.1 - 1% | Yes |
| Substituted phthalic anhydride | 34090-76-1 | 0.1 - 1% | Yes |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 0.1 - 1% | Yes |
| Tetrahydrophthalic anhydride | 85-43-8 | 0.1 - 1% | Yes |
| C,C'-azodi(formamide) | 123-77-3 | 0.1 - 1% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Seek medical advice. Do not induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use dry chemical, water spray or carbon dioxide. foam
Not available.
None known.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage. Do not allow product to enter sewer or waterways.
Dispose of according to Federal, State and local governmental regulations.
Related Products
Similar products with comparable safety profiles
TEROSON PV 1805 ANTI-FLUTTER ADHESIVE known as TEROSTAT 1805
---
TEROSON PV 4510 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-4510 (MS-CD 470F)
---
TEROSON PV 1273 ANTI-FLUTTER ADHESIVE known as TEROSTAT 06-1273
---
TEROSON PV 351-2B ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-351-2B TMM
---
TEROSON PV 4510 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-4510 MS-CD 470F
---
TEROSON PV 1805 ANTI-FLUTTER ADHESIVE
---
TEROSON EP 5089 STRUCTURAL ADHESIVE known as TEROKAL 5089
---
TEROSON PV 5308 FLANGE BONDING ADHESIVE known as TEROKAL 5308
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. For industrial use only. Do not take internally.
Store between 10 °C (50°F) and 30.0 °C (86°F). Keep away from heat and direct sunlight. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Keep away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Avoid excessive heat (>46°C (>115°F)) and sources of ignition.
This product may react with strong acids or oxidizing agents.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON RB 491 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-491 adhesive and sealant?
The signal word is danger.
What is the physical form of TEROSON RB 491 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-491 adhesive and sealant?
TEROSON RB 491 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-491 adhesive and sealant is a liquid with gray / grey color. It has mild odor.
What is the solubility of TEROSON RB 491 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-491 adhesive and sealant?
Negligible Water
What are the hazard statements for TEROSON RB 491 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-491 adhesive and sealant?
This substance has 4 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H350: MAY CAUSE CANCER.
What is the melting point of TEROSON RB 491 ANTI-FLUTTER ADHESIVE known as TEROSTAT SA-491 adhesive and sealant?
The melting point is Not available. and the boiling point is > 104 °C (> 219.2 °F) calculated.