Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW
- Product Code
- 1653282
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive for the Aerospace Industry
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608 (toll free)
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300 (toll free)
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Modified epoxy resin | --- | 30 - 60% | Yes |
| Epoxy resin | --- | 30 - 60% | Yes |
| Bisphenol A Diglycidyl Ether | 1675-54-3 | 1 - 5% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9695 080K AERO
---
LOCTITE EA 9820 60Z AERO
---
LOCTITE EA 9696 085NW AERO WEB
---
LOCTITE EA 9330 AERO PART B 8OZ
---
LOCTITE EA 9394.2 AERO PART A 200ML
---
LOCTITE EA 3473 known as Loctite 3473 A+B Hysol
UFI: Y5G7-SXF9-J20R-N0DE
LOCTITE EA 9814 6OZ AERO APAC BMS
---
LOCTITE EA 9203 GAL AERO EN-DE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe fumes or dust from this material. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation should effectively remove and prevent buildup of any dust generated from the handling of this product.
Wear impervious gloves for prolonged contact.
Safety goggles or safety glasses with side shields.
If ventilation is not sufficient to effectively prevent buildup of dust, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
May occur.
Avoid heating masses of film greater than 1 pound (0.454 kg) total. Avoid heating unless curing surfaces to be bonded. Failure to observe these precautions may result in excessive heat build-up causing an exotherm.
Keep away from strong oxidizing agents, strong Lewis or mineral acids.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW?
The signal word is warning.
What is the physical form of LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW?
LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW is a solid with green color. It has mild odor.
What is the solubility of LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW?
Not soluble Water
What is LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW used for?
Adhesive for the Aerospace Industry
What are the hazard statements for LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW?
The melting point is < 10 °C (< 50°F) and the boiling point is > 120 °C (> 248°F).