Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 608 B AERO known as HYSOL 608 - PART B
- Product Code
- 901678
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Part B of 2-Component Epoxy Adhesive.
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,4,6-tris(dimethylaminomethyl)phenol | 90-72-2 | 5 - 10% | Yes |
| Silica, amorphous, fumed, cryst.-free | 112945-52-5 | 5 - 10% | Yes |
| Ethylene glycol | 107-21-1 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9681 060NW AERO known as HYSOL EA 9681.060 PSF NW SX
---
LOCTITE EA 9845LA 020-016 AERO known as HYSOL EA 9845 LSA 0.020/0.016 S
---
LOCTITE EA 9845LC 020-029 AERO known as HYSOL EA 9845 LSC 0.020/0.029 S
---
LOCTITE EA 9896 025WPP AERO known as HYSOL EA 9896 .025 PSF WPP
---
LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW
---
LOCTITE EA 9695 050NW AERO known as HYSOL EA 9695 .050 PSF NW
---
LOCTITE EA 9690 030NW AERO known as HYSOL XEA 9690 .030 M
---
LOCTITE EA 9394 AERO PART B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Store in original container until ready to use. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Protect from direct sunlight.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight.
Strong acids. Strong bases. Strong oxidizing agents.
Oxides of carbon. Oxides of nitrogen. Oxides of sulfur. Alcohols. Aldehydes. Ethers. Hydrogen sulfide. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 608 B AERO known as HYSOL 608 - PART B?
The signal word is danger.
What is the physical form of LOCTITE EA 608 B AERO known as HYSOL 608 - PART B?
LOCTITE EA 608 B AERO known as HYSOL 608 - PART B is a paste, liquid appearing as translucent, amber with translucent, amber color. It has slight, ammoniacal odor.
What is the solubility of LOCTITE EA 608 B AERO known as HYSOL 608 - PART B?
Slightly soluble Water
What is LOCTITE EA 608 B AERO known as HYSOL 608 - PART B used for?
Part B of 2-Component Epoxy Adhesive.
What are the hazard statements for LOCTITE EA 608 B AERO known as HYSOL 608 - PART B?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE EA 608 B AERO known as HYSOL 608 - PART B?
The melting point is Not applicable, Product is a liquid and the boiling point is > 260.2 °C (> 500.4 °F) > 200 °C (> 392°F) 1,013 hPa.