Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-PT E2 REACTION RINSE known as AQUENCE E2 RXN RINSE
- Product Code
- 833558
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammonium hexafluorozirconate | 16919-31-6 | 1 - 5% | Yes |
| Hexafluorozirconic acid | 12021-95-3 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.
Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.
Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.
Get immediate medical attention. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical.
Not available.
This product is an aqueous mixture which will not burn.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-PT E3B REACTION RINSE known as AQUENCE E3B RXN RINSE
---
BONDERITE M-PT 2150 REACTION RINSE known as AQUENCE 2150 RXN RINSE
---
BONDERITE M-PT E3C RR REACTION RINSE known as AQUENCE E3C RXN RINSE KN39 WE
---
BONDERITE M-PT 3416 REACTION RINSE known as AQUENCE 3416 RXN RINSE
---
BONDERITE M-PT E3B REACTION RINSE known as AQUENCE E3B RXN RINSE LF205 WENS
---
BONDERITE M-PT DX AID POST TREATMENT known as DX RINSE AID
---
BONDERITE C-AK E3A REACTION RINSE PA22KG
---
BONDERITE M-PT R 300 POST TREATMENT known as POLYPREP RINSE 300
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing mists or aerosols of this product. Wash thoroughly after handling.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Store away from incompatible materials.
This product may react with strong alkalies. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. May liberate hydrogen fluoride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-PT E2 REACTION RINSE known as AQUENCE E2 RXN RINSE?
The signal word is danger.
What is the physical form of BONDERITE M-PT E2 REACTION RINSE known as AQUENCE E2 RXN RINSE?
BONDERITE M-PT E2 REACTION RINSE known as AQUENCE E2 RXN RINSE is a liquid with colorless / colorless color. It has ammoniacal odor.
What is the solubility of BONDERITE M-PT E2 REACTION RINSE known as AQUENCE E2 RXN RINSE?
Complete
What is BONDERITE M-PT E2 REACTION RINSE known as AQUENCE E2 RXN RINSE used for?
Additive
What are the hazard statements for BONDERITE M-PT E2 REACTION RINSE known as AQUENCE E2 RXN RINSE?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION
- H318: CAUSES SERIOUS EYE DAMAGE
What is the melting point of BONDERITE M-PT E2 REACTION RINSE known as AQUENCE E2 RXN RINSE?
The melting point is 0 °C (32°F) and the boiling point is > 115.6 °C (> 240.1 °F).