Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-PT 3416 REACTION RINSE known as AQUENCE 3416 RXN RINSE
- Product Code
- 643678
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
CHEMTREC
1-703-527-3887
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Notes
Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-PT 2150 REACTION RINSE known as AQUENCE 2150 RXN RINSE
---
BONDERITE M-PT E3B REACTION RINSE known as AQUENCE E3B RXN RINSE
---
BONDERITE M-PT E2 REACTION RINSE known as AQUENCE E2 RXN RINSE
---
BONDERITE M-PT E3C RR REACTION RINSE known as AQUENCE E3C RXN RINSE KN39 WE
---
BONDERITE M-PT E3B REACTION RINSE known as AQUENCE E3B RXN RINSE LF205 WENS
---
BONDERITE M-PT DX AID POST TREATMENT known as DX RINSE AID
---
BONDERITE M-AD 140 known as AQUENCE 140 OXIDIZER
---
BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.
store between 40 °F (4.4 °C) and 100 °F (37.8 °C) Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Do not freeze.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Chemical resistant, impermeable gloves.
Wear chemical goggles; face shield (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided. When workplace hazards warrant the use of a respirator, appropriate respirators must be used, and a program that follows 29 CFR 1910.134 must be followed.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong reducing agents.
None under normal processing.
Store away from incompatible materials.
Oxidizers.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-PT 3416 REACTION RINSE known as AQUENCE 3416 RXN RINSE?
The signal word is no signal word.
What is the physical form of BONDERITE M-PT 3416 REACTION RINSE known as AQUENCE 3416 RXN RINSE?
BONDERITE M-PT 3416 REACTION RINSE known as AQUENCE 3416 RXN RINSE is a liquid with clear color. It has ammoniacal odor.
What is the solubility of BONDERITE M-PT 3416 REACTION RINSE known as AQUENCE 3416 RXN RINSE?
Complete
What is BONDERITE M-PT 3416 REACTION RINSE known as AQUENCE 3416 RXN RINSE used for?
Coating
What is the melting point of BONDERITE M-PT 3416 REACTION RINSE known as AQUENCE 3416 RXN RINSE?
The melting point is Not available. and the boiling point is > 210 °F (> 98.9 °C) calculated.