Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ED SEAL NF-1 ANODIZING SEAL known as ALMECO SEAL NF-1 ADDITIVE
- Product Code
- 677524
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Get immediate medical attention. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.
Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.
Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.
Immediate medical treatment necessary. DO NOT induce vomiting unless directed to do so by medical personnel. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively. Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-NT NF-1 R ANODIZING SEAL known as ALMECO SEAL NF-1 REPLENISH ER
---
BONDERITE M-NT NF-1 MU ANODIZING SEAL known as ALMECO SEAL NF-1 MAKEUP
---
BONDERITE M-ED SEAL MT ADDITIVE
---
BONDERITE M-ED SEAL 9000 ANODIZING SEAL known as ANOSEAL 9000
---
BONDERITE M-ED SEAL 1085
---
BONDERITE M-ED SEAL 2020 MU ANODIZING SEAL
---
BONDERITE M-ED SEAL 2121 A
---
BONDERITE M-ED SEAL 2500
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin and eye contact. Wash thoroughly after handling. Provide adequate ventilation. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials.
This product may react with strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. May liberate hydrogen fluoride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-ED SEAL NF-1 ANODIZING SEAL known as ALMECO SEAL NF-1 ADDITIVE?
The signal word is danger.
What is the physical form of BONDERITE M-ED SEAL NF-1 ANODIZING SEAL known as ALMECO SEAL NF-1 ADDITIVE?
BONDERITE M-ED SEAL NF-1 ANODIZING SEAL known as ALMECO SEAL NF-1 ADDITIVE is a liquid with colourless / colorless color. It has odourless / odorless odor.
What is the solubility of BONDERITE M-ED SEAL NF-1 ANODIZING SEAL known as ALMECO SEAL NF-1 ADDITIVE?
Complete Water
What is BONDERITE M-ED SEAL NF-1 ANODIZING SEAL known as ALMECO SEAL NF-1 ADDITIVE used for?
Sealant
What are the hazard statements for BONDERITE M-ED SEAL NF-1 ANODIZING SEAL known as ALMECO SEAL NF-1 ADDITIVE?
This substance has 3 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H311 + H331: TOXIC IN CONTACT WITH SKIN OR IF INHALED.
- H318: CAUSES SERIOUS EYE DAMAGE.
What is the melting point of BONDERITE M-ED SEAL NF-1 ANODIZING SEAL known as ALMECO SEAL NF-1 ADDITIVE?
The melting point is Not applicable and the boiling point is 212 °F (100°C).