Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-MA 2247 PAINT STRIPPER
- Synonyms
- P3 TACKY OVEN COATING 2247
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Strippable protective paint coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
CHEMTREC
1-703-527-3887
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Solvent naphtha (petroleum), medium aliph. | 64742-88-7 | 60 - 80% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
For skin contact flush with large amounts of water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses. Vapours may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Remove all sources of ignition. Ensure adequate ventilation. Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-ST 1270-6 PAINT STRIPPER known as Turco 1270-6 (BMS 11-13)
---
BONDERITE S-AD HOT 15 PAINT STRIPPER known as P3 HOT STRIPPER ADDITIVE 15
---
BONDERITE C-SO 264 SOLVENT CLEANER
---
BONDERITE C-SO 118 SOLVENT CLEANER
---
BONDERITE C-SO 283 SOLVENT CLEANER
---
BONDERITE C-SO 575 WB SOLVENT CLEANER
---
BONDERITE C-AK 412-C Cleaner
---
BONDERITE C-SO 575 WB SOLVENT CLEANER DR213KG
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition; they may explode.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, spark and flame.
This product may react with strong acids, bases and oxidizing agents.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1268
- Shipping Name
- Petroleum products, n.o.s.
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE S-MA 2247 PAINT STRIPPER known by?
BONDERITE S-MA 2247 PAINT STRIPPER is also known as: P3 TACKY OVEN COATING 2247
What is the hazard signal word for BONDERITE S-MA 2247 PAINT STRIPPER?
The signal word is warning.
What is the physical form of BONDERITE S-MA 2247 PAINT STRIPPER?
BONDERITE S-MA 2247 PAINT STRIPPER is a liquid with colourless / colorless color. It has petroleum odor.
What is the solubility of BONDERITE S-MA 2247 PAINT STRIPPER?
Negligible Water
What is BONDERITE S-MA 2247 PAINT STRIPPER used for?
Strippable protective paint coating
What are the hazard statements for BONDERITE S-MA 2247 PAINT STRIPPER?
This substance has 4 hazard statements:
- H226: FLAMMABLE LIQUID AND VAPOUR.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of BONDERITE S-MA 2247 PAINT STRIPPER?
The melting point is Not determined and the boiling point is >159 °C (>318.2 °F).