Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-ST 1270-6 PAINT STRIPPER known as Turco 1270-6 (BMS 11-13)
- Product Code
- 1081831
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint stripping agents
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzyl alcohol | 100-51-6 | 40 - 50% | Yes |
| Alkylphenol ethoxylate | --- | 1 - 5% | Yes |
IDH number: 1081831 Product name: BONDERITE S-ST 1270-6 PAINT STRIPPER known as Turco 1270-6 (BMS 11-13)
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Flush with large amounts of water. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water and seek medical advice.
Immediately contact a physician or poison control center. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation/skin). Seek medical advice (eyes). Immediately contact a physician or poison control center (ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
This product is combustible at high temperatures.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-MA 2247 PAINT STRIPPER
---
BONDERITE S-ST 1270-5 AERO known as TURCO 1270-5
---
BONDERITE S-ST 6930 AERO known as TURCO EA STRIPPER 6930 *MBO440G
---
BONDERITE S-AD HOT 15 PAINT STRIPPER known as P3 HOT STRIPPER ADDITIVE 15
---
BONDERITE C-AK 4338LP1 AERO ALKALINE CLEANER known as TURCO 4338L PART 1
---
BONDERITE C-AK 3878-LF-NC AERO ALKALINE CLEANER known as TURCO 3878 LF-NC
---
BONDERITE C-AK TPCR 88 AERO ALKALINE CLEANER known as TURCO TPC REMOVER 88
---
BONDERITE C-AK 5948-DPM known as TURCO 5948-DPM
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Wash thoroughly after handling. Do not take internally. Keep away from heat, spark and flame.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition.
This product may react with strong acids, bases and oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-ST 1270-6 PAINT STRIPPER known as Turco 1270-6 (BMS 11-13)?
The signal word is warning.
What is the physical form of BONDERITE S-ST 1270-6 PAINT STRIPPER known as Turco 1270-6 (BMS 11-13)?
BONDERITE S-ST 1270-6 PAINT STRIPPER known as Turco 1270-6 (BMS 11-13) is a liquid with white color. It has mild odor.
What is BONDERITE S-ST 1270-6 PAINT STRIPPER known as Turco 1270-6 (BMS 11-13) used for?
Paint stripping agents
What are the hazard statements for BONDERITE S-ST 1270-6 PAINT STRIPPER known as Turco 1270-6 (BMS 11-13)?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE S-ST 1270-6 PAINT STRIPPER known as Turco 1270-6 (BMS 11-13)?
The melting point is Not determined and the boiling point is 105 °C (221°F)calculated.