NextSDS Logo
Safety Data Sheet EN

BONDERITE M-CR NR-6207 RT NA CHROMATE COATING

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-CR NR-6207 RT NA CHROMATE COATING
Product Code
2431067

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Conversion coating

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Skin Corr. Cat. 1B
Eye Dam. Cat. 1
Skin Sens. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H302 HARMFUL IF SWALLOWED
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE
H317 MAY CAUSE AN ALLERGIC SKIN REACTION

Precautionary Statements

P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell. Rinse mouth.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Chromium trifluoride 7788-97-8 5 - 10% Yes
Phosphoric acid 7664-38-2 1 - 5% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.

Skin contact

Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.

Eye contact

Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Get medical attention. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

GET IMMEDIATE MEDICAL ATTENTION. Get immediate medical attention. Get medical attention.

Medical Treatment

Ocular exposure to corrosive fluoride compounds has been treated with isotonic sodium chloride or magnesium chloride. Dermal exposure to corrosive fluoride compounds has been treated with calcium gluconate or calcium carbonate gel applied topically to the affected areas to relieve pain at the site of exposure. Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear self contained breathing apparatus. Wear protective equipment.

Firefighter Protection

Wear self contained breathing apparatus. Wear protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid breathing vapors or mists of this product. Avoid contact with eyes, skin and clothing. Wear protective equipment. Wash thoroughly after handling. Do not take internally. For industrial use only.

Storage

For safe storage, store between 5 °C (41°F) and 50 °C (122°F) Thaw and mix thoroughly if frozen.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Fat
---
State Under Standard Conditions
---
Melting Point
Not available.
Upper Explosive Limit
Not available.
Cloud Point
---
Boiling Point
> 100 °C (> 212°F)
Relative Density
1.075 - 1.115
Dynamic Viscosity
Not available.
Flammability
Not applicable
Explosive Limits
---
Density
---
Molecular Weight
---
Physical State Data
liquid
Physical State
Liquid
Crystallisation Point
---
Metal Corrosion
---
Flash Point
Not determined
Partition Coefficient
Not available.
Relative Evaporation Rate
---
Vapor Pressure
Not determined
Freezing Point
---
Appearance
---
Bulk Density
---
Ph
2.5 - 3.0
Odor Threshold
Not available.
Solidification Point
---
Odor
Mild
Auto Ignition Temperature
Not available.
Evaporation Rate
Not available.
Vapor Density
---
Colour
Dark, Green
Lower Explosive Limit
Not available.
Decomposition Temperature
Not available.
Form
---
Kinematic Viscosity
Not available.
Voc Content
0 % (calculated)
Properties Status
---
Softening Point
---
Solubility In Water
---
Colour Intensity
---
Solubility
Complete Water Aqueous solution
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

May react with strong bases or oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. May liberate hydrogen fluoride.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3264
Shipping Name
Corrosive liquid, acidic, inorganic, n.o.s. (Phosphoric acid, Chromic fluoride)
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE M-CR NR-6207 RT NA CHROMATE COATING?

The signal word is danger.

What is the physical form of BONDERITE M-CR NR-6207 RT NA CHROMATE COATING?

BONDERITE M-CR NR-6207 RT NA CHROMATE COATING is a liquid with dark, green color. It has mild odor.

What is the solubility of BONDERITE M-CR NR-6207 RT NA CHROMATE COATING?

Complete Water Aqueous solution

What is BONDERITE M-CR NR-6207 RT NA CHROMATE COATING used for?

Conversion coating

What are the hazard statements for BONDERITE M-CR NR-6207 RT NA CHROMATE COATING?

This substance has 3 hazard statements:

  • H302: HARMFUL IF SWALLOWED
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION

What is the melting point of BONDERITE M-CR NR-6207 RT NA CHROMATE COATING?

The melting point is Not available. and the boiling point is > 100 °C (> 212°F).