Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 10 PRETREATMENT ADDITIVE
- Product Code
- 2687973
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Remove contaminated clothing and footwear. Flush with large amounts of water.
Rinse immediately with plenty of water for 15 minutes.
Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (skin, eye, ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 300 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 301 PRETREATMENT ADDITIVE
---
BONDERITE M-AD TONER S PRETREATMENT ADDITIVE
---
BONDERITE M-AD A PRETREATMENT ADDITIVE known as ADDITIVE A
---
BONDERITE M-AD 1 PRETREATMENT ADDITIVE known as ADDITIVE 1
---
BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG
---
BONDERITE M-AD 110 PRETREATMENT ADDITIVE known as ADDITIVE 110
---
BONDERITE M-AD 100FL PRETREATMENT ADDITIVE known as ADDITIVE 100
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. For industrial use only. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials.
Keep away from organic, alkaline, and oxidizing materials, metallic powders, chromates, chlorates, nitrates, and carbides. Reaction with reducing agents. Adding water to this product may cause localized overheating and splattering.
Oxides of sulfur.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-AD 10 PRETREATMENT ADDITIVE?
The signal word is danger.
What is the physical form of BONDERITE M-AD 10 PRETREATMENT ADDITIVE?
BONDERITE M-AD 10 PRETREATMENT ADDITIVE is a liquid with light green color. It has odourless / odorless odor.
What is the solubility of BONDERITE M-AD 10 PRETREATMENT ADDITIVE?
Complete Water
What is BONDERITE M-AD 10 PRETREATMENT ADDITIVE used for?
Additive
What are the hazard statements for BONDERITE M-AD 10 PRETREATMENT ADDITIVE?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H350: MAY CAUSE CANCER.
What is the melting point of BONDERITE M-AD 10 PRETREATMENT ADDITIVE?
The melting point is Not determined and the boiling point is > 212 °F (> 100°C).