Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 338 PRETREATMENT ADDITIVE DR215KG
- Product Code
- 3075772
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammonium bifluoride | 1341-49-7 | 10 - 30% | Yes |
| Ammonium fluoride | 12125-01-8 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.
Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.
Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Eye flushing should continue during transportation to a doctor.
DO NOT induce vomiting unless directed to do so by medical personnel. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist. Get immediate medical attention.
Medical Treatment
Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate. Ocular exposure to corrosive fluoride compounds has been treated with isotonic sodium chloride or magnesium chloride. Dermal exposure to corrosive fluoride compounds has been treated with calcium gluconate or calcium carbonate gel applied topically to the affected areas to relieve pain at the site of exposure.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
This product is an aqueous mixture which will not burn.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 229 PRETREATMENT ADDITIVE DR272KG
---
BONDERITE M-AD 710 PRETREATMENT ADDITIVE PA19KG
---
BONDERITE M-AD ZN2 PRETREATMENT ADDITIVE DR302KG
---
BONDERITE M-AD 300 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 301 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 10 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 101 PRETREATMENT ADDITIVE IBC1623KG
---
BONDERITE M-AD 315 PRETREATMENT ADDITIVE known as ADDITIVE 315
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing vapors or mists of this product. Avoid contact with eyes, skin and clothing. Wear protective equipment. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong alkalies.
Will not occur.
Store away from incompatible materials.
This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics. This product may react with strong acids, bases and oxidizing agents.
May liberate hydrogen fluoride. Ammonia.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2817
- Shipping Name
- Ammonium hydrogendifluoride solution
- Transport Class
- 8 (6.1)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-AD 338 PRETREATMENT ADDITIVE DR215KG?
The signal word is danger.
What is the physical form of BONDERITE M-AD 338 PRETREATMENT ADDITIVE DR215KG?
BONDERITE M-AD 338 PRETREATMENT ADDITIVE DR215KG is a liquid with colourless / colorless color. It has pungent odor.
What is the solubility of BONDERITE M-AD 338 PRETREATMENT ADDITIVE DR215KG?
Complete Water
What is BONDERITE M-AD 338 PRETREATMENT ADDITIVE DR215KG used for?
Additive
What are the hazard statements for BONDERITE M-AD 338 PRETREATMENT ADDITIVE DR215KG?
This substance has 2 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE M-AD 338 PRETREATMENT ADDITIVE DR215KG?
The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212°F) None.