NextSDS Logo
Safety Data Sheet EN

TEROSON PV PURGE PASTE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON PV PURGE PASTE
Product Code
855681
Synonyms
TEROLAN PURGE PASTE

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2A
Carc. Cat. 1A
STOT RE Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H319 CAUSES SERIOUS EYE IRRITATION.
H350 MAY CAUSE CANCER.
H372 CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves, clothing, eye and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 60 - 80% Yes
Diisononyl phthalate 28553-12-0 10 - 30% Yes
Calcium carbonate 471-34-1 5 - 10% Yes
Quartz (SiO2) respirable particulates (RCS) >=10% 14808-60-7 1 - 5% Yes

IDH number: 855681 Product name: TEROSON PV PURGE PASTE known as TEROLAN PURGE PASTE

Notes

Percentage ranges provided in the table below.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air.

Skin contact

Immediately flush skin with plenty of water (using soap, if available).

Eye contact

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel.

Immediate Medical Attention

Seek medical attention if symptoms develop or persist.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

This product is combustible at high temperatures.

Instructions

Wear self-contained breathing apparatus. Wear full protective clothing.

Firefighter Protection

Wear self-contained breathing apparatus. Wear full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from direct sunlight.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Molecular Weight
---
Form
---
Freezing Point
---
Voc Content
Not applicable
Boiling Point
> 148 °C (> 298.4 °F) Supplier method
Density
---
Solubility In Fat
---
Solubility In Water
practically insoluble
Properties Status
---
Odor Threshold
Not available.
Upper Explosive Limit
Not applicable
Relative Density
1.85 at 25 °C (77°F)
Flammability
Not applicable
Partition Coefficient
Not available.
Lower Explosive Limit
Not applicable
Solubility
---
Colour
Gray / Grey
Vapor Pressure
Not available.
Colour Intensity
---
Odor
Mild
Bulk Density
---
Relative Evaporation Rate
---
Flash Point
> 148 °C (> 298.4 °F) Supplier method
Decomposition Temperature
Not available.
Metal Corrosion
---
Ph
Not available.
Solidification Point
---
Melting Point
Not available.
Dynamic Viscosity
---
Kinematic Viscosity
---
Explosive Limits
---
Physical State Data
liquid
Auto Ignition Temperature
Not available.
Crystallisation Point
---
Appearance
---
Evaporation Rate
Not available.
Softening Point
---
Vapor Density
Not determined
Physical State
Liquid
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Heat, flames, sparks and other sources of ignition.

Incompatible

None expected.

Decomposition

Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is TEROSON PV PURGE PASTE known by?

TEROSON PV PURGE PASTE is also known as: TEROLAN PURGE PASTE

What is the hazard signal word for TEROSON PV PURGE PASTE?

The signal word is danger.

What is the physical form of TEROSON PV PURGE PASTE?

TEROSON PV PURGE PASTE is a liquid with gray / grey color. It has mild odor.

What is TEROSON PV PURGE PASTE used for?

Cleaner

What are the hazard statements for TEROSON PV PURGE PASTE?

This substance has 3 hazard statements:

  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H350: MAY CAUSE CANCER.
  • H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of TEROSON PV PURGE PASTE?

The melting point is Not available. and the boiling point is > 148 °C (> 298.4 °F) Supplier method.