Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-ST 6930 AERO
- Product Code
- 598671
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint stripping agents
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| benzyl alcohol | 100-51-6 | 30 - 60% | Yes |
| Hydrogen peroxide solution | 7722-84-1 | 5 - 10% | Yes |
| Limonene, D- | 5989-27-5 | 1 - 5% | Yes |
| 2-Methylbut-3-yn-2-ol | 115-19-5 | 1 - 5% | Yes |
| dibenzyl ether | 103-50-4 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately remove contaminated clothing and flush skin with copious amounts of water. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not a fire hazard.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Contain spill.
Wear appropriate protective equipment and clothing during clean-up. Absorb spill with inert material. Shovel material into appropriate container for disposal. Ventilate area.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Keep container closed. Provide adequate ventilation. Wash thoroughly after handling.
Keep the container tightly closed and in a cool, well-ventilated place. Protect from freezing. Ship and store above 40° F.
Wash thoroughly after handling.
Do not store around flammable or combustible materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with oxidizing agents. Reaction with strong acids. This product may react with strong reducing agents.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-ST 6930 AERO?
The signal word is danger.
What is the physical form of BONDERITE S-ST 6930 AERO?
BONDERITE S-ST 6930 AERO is a liquid with white color. It has mild odor.
What is the solubility of BONDERITE S-ST 6930 AERO?
Appreciable Water
What is BONDERITE S-ST 6930 AERO used for?
Paint stripping agents
What are the hazard statements for BONDERITE S-ST 6930 AERO?
This substance has 5 hazard statements:
- H271: MAY CAUSE FIRE OR EXPLOSION; STRONG OXIDIZER.
- H302 + H332: HARMFUL IF SWALLOWED OR IF INHALED.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE S-ST 6930 AERO?
The melting point is Not applicable and the boiling point is > 225 °F (> 107.2 °C).