Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-ST 6813E AERO
- Product Code
- 596851
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint stripping agents
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| benzyl alcohol | 100-51-6 | 30 - 60% | Yes |
| Anisole | 100-66-3 | 5 - 10% | Yes |
| Ammonium hydroxide | 1336-21-6 | 1 - 5% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
For skin contact flush with large amounts of water. Obtain medical attention if irritation persists.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is combustible at high temperatures.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Prevent further leakage or spillage if safe to do so. Contain spill. Ventilate area.
Prevent further leakage or spillage if safe to do so. Contain spill. Do not allow product to enter sewer or waterways.
Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container.
Materials: inert absorbent such as sand or vermiculite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Provide adequate ventilation. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. Do not reuse the empty container. Do not take internally. For industrial use only.
Keep the container tightly closed and in a cool, well-ventilated place.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Avoid excessive heat and ignition sources.
This product may react with strong acids or oxidizing agents. Will attack some forms of plastic, rubber, and coatings.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-ST 6813E AERO?
The signal word is danger.
What is the physical form of BONDERITE S-ST 6813E AERO?
BONDERITE S-ST 6813E AERO is a liquid with pink color. It has ammoniacal odor.
What is the solubility of BONDERITE S-ST 6813E AERO?
Appreciable Water
What is BONDERITE S-ST 6813E AERO used for?
Paint stripping agents
What are the hazard statements for BONDERITE S-ST 6813E AERO?
This substance has 4 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE S-ST 6813E AERO?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F).