NextSDS Logo
Safety Data Sheet EN

TEROSON MS 5555 WH

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON MS 5555 WH
Product Form
Silicone adhesive
Product Code
2575708

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Repr. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H361 SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 30 - 60% Yes
Phthalic acid, di(C9-11)alkylester, branched, C10-rich 68515-49-1 1 - 5% Yes
Benzene, mono-C10-13-alkyl derivs. 129813-58-7 1 - 5% Yes
Trimethoxyvinylsilane 2768-02-7 1 - 5% Yes
Benzene, mono-C12-14-alkyl derivs. 129813-59-8 1 - 5% Yes
Bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate 52829-07-9 0.1 - 1% Yes
Quartz (SiO2), <1% respirable 14808-60-7 0.1 - 1% Yes

Notes

*Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If symptoms persist, seek medical advice.

Skin contact

Wash with soap and water. If skin irritation persists, call a physician. Wipe off paste with paper towel or cloth.

Eye contact

Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time. If symptoms develop and persist, get medical attention.

Ingestion

Do not induce vomiting. If a person feels unwell or symptoms of skin irritation appear, consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

carbon dioxide, foam, powder, water spray jet, fine water spray

Unsuitable media

Not available.

Specific hazards

None identified.

Instructions

Wear protective equipment. Wear self-contained breathing apparatus.

Firefighter Protection

Wear protective equipment. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Large spill

Maintain good ventilation for large spills.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Refer to Section 8 'Exposure Controls / Personal Protection' prior to clean up. Store in a partly filled, closed container until disposal. Spilled material will solidify. Scrape up as much material as possible.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not handle contact lenses until all sealant has been removed from hands. Residual sealant may transfer to lenses and cause eye irritation. Avoid contact with eyes, skin and clothing. Keep out of the reach of children. Protect from moisture.

Storage

Store in a cool, dry area. Avoid moisture.

Hygiene

Do not handle contact lenses until all sealant has been removed from hands.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Flash Point
107 °C (224.6 °F) ASTM D3278 Setaflash Closed Cup
Bulk Density
---
Dynamic Viscosity
Not available.
Metal Corrosion
---
Appearance
---
Relative Evaporation Rate
---
Boiling Point
Not applicable
Physical State
Liquid
Softening Point
---
Odor
Alcohol
Auto Ignition Temperature
Not applicable
Solubility In Water
---
Solubility In Fat
---
Properties Status
---
Solubility
Insoluble Water
State Under Standard Conditions
---
Density
---
Freezing Point
---
Relative Density
1.4 - 1.5 at 20 °C (68°F)
Partition Coefficient
Not available.
Flammability
Not applicable
Odor Threshold
Not available.
Solidification Point
---
Cloud Point
---
Ph
Not applicable
Explosive Limits
---
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Vapor Pressure
Not applicable
Decomposition Temperature
Not available.
Colour
Colored
Physical State Data
liquid
Form
---
Evaporation Rate
Not applicable
Melting Point
Not applicable
Molecular Weight
---
Kinematic Viscosity
Not available.
Crystallisation Point
---
Voc Content
2.48 %
Vapor Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

Not available.

Avoid

Exposure to moisture.

Incompatible

Oxidizing agents.

Decomposition

Methanol is liberated slowly upon exposure to moisture.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON MS 5555 WH?

The signal word is warning.

What is the physical form of TEROSON MS 5555 WH?

TEROSON MS 5555 WH is a liquid with colored color. It has alcohol odor.

What is the solubility of TEROSON MS 5555 WH?

Insoluble Water

What are the hazard statements for TEROSON MS 5555 WH?

This substance has 3 hazard statements:

  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

What is the melting point of TEROSON MS 5555 WH?

The melting point is Not applicable and the boiling point is Not applicable.