Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE
- Synonyms
- RODINE 3305
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hexamethylenetetramine hydrochloride | 58713-21-6 | 10 - 30% | Yes |
| Amines, polyethylenepoly-, benzyl chloride-quaternized, polymers with glyoxal | 78330-33-3 | 1 - 5% | Yes |
| methenamine | 100-97-0 | 1 - 5% | Yes |
| Coco alkyl amine with EO, acetates (salts) | 61791-15-9 | 1 - 5% | Yes |
| Tetraethylene pentamine | 112-57-2 | 0.1 - 1% | Yes |
| 3,6,9,12-tetraazatetradecamethylenediamine | 4067-16-7 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If symptoms are experienced, remove source of contamination or move victim to fresh air. If symptoms develop and persist, get medical attention.
For skin contact flush with large amounts of water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Ventilate area. Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE
---
BONDERITE S-AD 145L ACID INHIBITOR ADDITIVE
---
BONDERITE S-AD 3305 ACHESON ACID INHIBITOR ADDITIVE
---
BONDERITE S-AD 213 SF ACHESON ACID INHIBITOR ADDITIVE
---
BONDERITE S-AD 213 SF ACID INHIBITOR ADDITIVE PA17KG ACHESON
---
BONDERITE S-AD 31A ACID INHIBITOR ADDITIVE known as RODINE 31A
---
BONDERITE S-AD 103 NPF Acid Inhibitor Additive IBC1315KG ACH
---
BONDERITE S-AD 221SF ACID INHIBITOR ACHESON known as BONDERITE S-AD 221SF
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Provide adequate ventilation. Avoid breathing vapors or mists of this product. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials.
This product may react with strong reducing agents. This product may react with strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE known by?
BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE is also known as: RODINE 3305
What is the hazard signal word for BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE?
The signal word is danger.
What is the physical form of BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE?
BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE is a liquid with brown color. It has mild odor.
What is the solubility of BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE?
Complete Water
What is BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE used for?
Additive
What are the hazard statements for BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
What is the melting point of BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE?
The melting point is 8 °F (-13.3 °C) and the boiling point is > 100 °C (> 212°F).