Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON
- Synonyms
- ACHESONGP714
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dry film lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silicic acid, potassium salt MR > 3.2 | 1312-76-1 | 1 - 5% | No |
| Molybdenum disulphide | 1317-33-5 | 10 - 30% | No |
| Carboxymethyl cellulose, sodium salt | 9004-32-4 | 1 - 5% | No |
| Graphite | 7782-42-5 | 1 - 5% | No |
| Tris(2-hydroxyethyl)hexahydro triazine | 4719-04-4 | 0.1 - 1% | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Immediately wash skin thoroughly with soap and water. Immediately remove soiled or soaked clothing. If irritation persists, repeat flushing and get medical attention. Discard any shoes or clothing items that cannot be decontaminated.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Immediate medical treatment necessary. Do not induce vomiting. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees.
Immediate Medical Attention
Immediate medical treatment necessary (for ingestion). Seek medical attention at once (for eye contact).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage. Block any potential routes to water systems.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 1105 SYNTHETIC FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417M GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 566AL GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 855 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG GP 101 GRAPHITE FORGING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Wear suitable protective clothing, safety glasses and gloves.
Store between 5.0 °C (41°F) and 30.0 °C (86°F). Protect from direct sunlight. Do not freeze. Keep the container tightly closed and in a cool, well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Protect from direct sunlight. Excessive heat. Freezing conditions.
This product may react with strong oxidizing agents.
Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON known by?
BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON is also known as: ACHESONGP714
What is the hazard signal word for BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON?
The signal word is danger.
What is the physical form of BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON?
BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON is a liquid with gray / grey color. It has no information available. odor.
What is the solubility of BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON?
Not available.
What is BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON used for?
Dry film lubricant
What are the hazard statements for BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON?
This substance has 2 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON?
The melting point is < 0 °C (< 32°F) and the boiling point is > 100 °C (> 212°F).