Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON
- Synonyms
- F-87 Lubricant
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tris(2-hydroxyethyl)hexahydro triazine | 4719-04-4 | 0.1 - 1% | Yes |
| Graphite | 7782-42-5 | 10 - 30% | Yes |
| Wheat flour | 130498-22-5 | 1 - 5% | Yes |
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek medical attention at once (for eyes), get medical attention if symptoms develop and persist (for inhalation, skin, ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 1105 SYNTHETIC FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 566AL GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417M GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 855 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F-50 GRAPHITE FORGING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
Store between 0 °C (32°F) and 50 °C (122°F). Keep away from heat, spark and flame. Keep container closed. Store in original container until ready to use. Keep out of reach of children and away from food and drink. Protect from direct sunlight.
Wash thoroughly after handling. Keep out of reach of children and away from food and drink.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Avoid excessive heat and ignition sources. Freezing conditions.
This product may react with strong acids or oxidizing agents.
Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON known by?
BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON is also known as: F-87 Lubricant
What is the hazard signal word for BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON?
The signal word is danger.
What is the physical form of BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON?
BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON is a liquid with black color. It has ammoniacal odor.
What is the solubility of BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON?
Disperses in water as a suspension Water
What is BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON used for?
None identified
What are the hazard statements for BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON?
This substance has 2 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON?
The melting point is <= 0 °C (<= 32°F) and the boiling point is > 100 °C (> 212°F)calculated.