Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON
- Product Code
- 922292
- Synonyms
- P3 FORGE 4258
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Borax | 1330-43-4 | 1 - 5% | No |
| Phosphoric acid | 7664-38-2 | 1 - 5% | No |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 1 - 5% | No |
| Graphite | 7782-42-5 | 10 - 30% | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove source of contamination or move victim to fresh air.
Flush with large amounts of water.
Immediately flush eyes with plenty of water for at least 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Surfaces may become slippery after spillage.
Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container. Flush area with water to remove trace residue.
Materials: inert absorbent such as sand or vermiculite
Related Products
Similar products with comparable safety profiles
BONDERITE L-FG F 417 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 855 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417M GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 566AL GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F-50 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG GP 101 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Provide adequate ventilation. Avoid breathing vapors or mists of this product. Wash thoroughly after handling.
Keep the container tightly closed and in a cool, well-ventilated place. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials.
This product may react with strong acids or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON known by?
BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON is also known as: P3 FORGE 4258
What is the hazard signal word for BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON?
The signal word is danger.
What is the physical form of BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON?
BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON is a liquid with black color. It has mild odor.
What is the solubility of BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON?
Complete Water
What is BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON used for?
Lubricant
What are the hazard statements for BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H350: MAY CAUSE CANCER.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON?
The melting point is Not determined and the boiling point is 212 °F (100°C).