Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ECCOBOND FP4526 known as 10CC FAST FLOW FLIP CHIP -40CD
- Product Code
- FP4526-V20
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Encapsulant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silica, vitreous | 60676-86-0 | 30 - 60% | Yes |
| hexahydromethylphthalic anhydride | 25550-51-0 | 10 - 30% | Yes |
| 2,2'-(3,3', 5,5'-tetramethyl-(1,1'-biphenyl)-4,4'-diyl)-bis(oxymethylene))-bis-oxirane | 85954-11-6 | 5 - 10% | Yes |
| Si-oxide amorphous (fumed) | 7631-86-9 | 5 - 10% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 5 - 10% | Yes |
| 7-Oxabicyclo[4.1.0]hept-3-ylmethyl 7-oxabicyclo[4.1.0]heptane-3-carboxylate | 2386-87-0 | 1 - 5% | Yes |
| 1,4-bis(2,3 epoxypropoxy)butane | 2425-79-8 | 1 - 5% | Yes |
| Substituted phthalic anhydride | 34090-76-1 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Check for and remove any contact lenses. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention for all exposure routes.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up. Soak up with inert absorbent material. Scrape up as much material as possible. Store in a partly filled, closed container until disposal.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up as much material as possible.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
LOCTITE ECCOBOND FP4470 known as 6OZ IC ENCP FOR 260C RFLW - 40CD
---
LOCTITE ECCOBOND FP4802 10CCMU
---
LOCTITE ECCOBOND FP4450 10CC
---
LOCTITE ECCOBOND FP4526 30CC
---
LOCTITE ECCOBOND FP4450 known as 10CC SEMI ENCAP ROCKWELL - 40CD
---
LOCTITE ECCOBOND FP4549 30CC
---
LOCTITE ECCOBOND CB064 10CC
---
LOCTITE ECCOBOND FP4549 10MLX
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Refer to Section 8. Keep container closed.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store in a dry place. Avoid moisture. Keep away from heat, spark and flame. Store in original container until ready to use.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Not available.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Exposure to moisture. Store away from incompatible materials. Heat, flames, sparks and other sources of ignition.
Strong oxidizing agents. Acids and bases. Alcohols. Amines.
Phenolics. Toxic fumes. Irritating vapors. Oxides of carbon. Oxides of nitrogen. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ECCOBOND FP4526 known as 10CC FAST FLOW FLIP CHIP -40CD?
The signal word is danger.
What is the physical form of LOCTITE ECCOBOND FP4526 known as 10CC FAST FLOW FLIP CHIP -40CD?
LOCTITE ECCOBOND FP4526 known as 10CC FAST FLOW FLIP CHIP -40CD is a liquid with blue color. It has characteristic odor.
What is the solubility of LOCTITE ECCOBOND FP4526 known as 10CC FAST FLOW FLIP CHIP -40CD?
Not miscible or difficult to mix Water
What is LOCTITE ECCOBOND FP4526 known as 10CC FAST FLOW FLIP CHIP -40CD used for?
Encapsulant
What are the hazard statements for LOCTITE ECCOBOND FP4526 known as 10CC FAST FLOW FLIP CHIP -40CD?
This substance has 6 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE ECCOBOND FP4526 known as 10CC FAST FLOW FLIP CHIP -40CD?
The melting point is Not applicable, Product is a liquid and the boiling point is Not applicable, Polymerizes before boiling point is reached..