Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK ATB 120MD6N 20UM X 12", PSA1
- Product Code
- 2998407
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Intermediate
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acrylic Ester | --- | 30 - 60% | Yes |
| Epoxy resin | --- | 10 - 30% | Yes |
| Siloxanes and Silicones, di-Me, reaction products with silica | 67762-90-7 | 10 - 30% | Yes |
| dapsone | 80-08-0 | 5 - 10% | Yes |
| Acrylic ester | --- | 5 - 10% | Yes |
| 2-Butanol | 78-92-2 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If symptoms develop and persist, get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
If symptoms persist, seek medical advice. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Sweep up or gather material and place in appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK ATB 107MD3N 12" X 7UM, PSA2
---
LOCTITE ABLESTIK ATB 125HA8 12" X 25UM, PSA2
---
LOCTITE ABLESTIK ATB 125GR2 12" X 25UM, 6140
---
LOCTITE ABLESTIK ATB F125E2 8" X 25UM, 6140
---
LOCTITE ABLESTIK ATB 110HB2U 8" X 10UM, UV2
---
LOCTITE ABLESTIK 5074 -125 12" X 20" SINGLE SH
---
LOCTITE ABLESTIK 561K 1-005 18" X 18" SH
---
LOCTITE ABLESTIK 2100AS
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. See Section 8 of the SDS for Personal Protective Equipment.
Store in a cool, dry, well-ventilated area. Store in original container until ready to use.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Excessive heat. Protect from direct sunlight. Store away from incompatible materials.
Strong oxidizing agents. Strong reducing agents. Strong alkalis. Nitric acid.
Oxides of carbon. Oxides of nitrogen. Hydrocarbons. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK ATB 120MD6N 20UM X 12", PSA1?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK ATB 120MD6N 20UM X 12", PSA1?
LOCTITE ABLESTIK ATB 120MD6N 20UM X 12", PSA1 is a solid with white color. It has odourless / odorless odor.
What is the solubility of LOCTITE ABLESTIK ATB 120MD6N 20UM X 12", PSA1?
Not available.
What is LOCTITE ABLESTIK ATB 120MD6N 20UM X 12", PSA1 used for?
Intermediate
What are the hazard statements for LOCTITE ABLESTIK ATB 120MD6N 20UM X 12", PSA1?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE ABLESTIK ATB 120MD6N 20UM X 12", PSA1?
The melting point is Not available. and the boiling point is Not available..