Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE O-TO 3000 B-1 CHROME COATING
- Product Code
- 643682
- Synonyms
- PASSERITE 3000 B-1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Passivating agent
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammonium dichromate | 7789-09-5 | 0.1 - 1% | Yes |
| 2-diethylaminoethanol | 100-37-8 | 0.1 - 1% | Yes |
| Ammonium hydroxide | 1336-21-6 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention. Launder contaminated clothing before reuse. Discard any shoes or clothing items that cannot be decontaminated.
Symptoms: chromate scabs and skin ulcers
Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.
Get immediate medical attention. Do not induce vomiting. If individual is conscious, wash out mouth with water. Provide a glass of water to dilute the material in the stomach.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material. Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: Inert material
Related Products
Similar products with comparable safety profiles
BONDERITE O-TO 5080 NON CHROME COATING
---
BONDERITE M-CR 53 CHROMATE COATING
---
BONDERITE O-TO 3001 THIN ORGANIC COATING
---
BONDERITE M-CR 47S CHROMATE COATING
---
BONDERITE M-NT 5220 R NON CHROME COATING
---
BONDERITE M-NT 1800 R27 NON CHROME COATING
---
BONDERITE M-AD T5900 AERO CHROMATE COATING
---
BONDERITE M-CR NR-6207 RT NA CHROMATE COATING
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Launder work clothes frequently. Do not store or consume food, drink, or tobacco products in areas where they may become contaminated with this material. Do not take internally. For industrial use only.
Not available.
Wash thoroughly after handling. Launder work clothes frequently. Do not store or consume food, drink, or tobacco products in areas where they may become contaminated with this material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials.
This product may react with strong reducing agents. Keep away from organic and combustible materials. Strong bases. Metals.
Upon decomposition, this product may yield oxides of nitrogen and ammonia, carbon dioxide, carbon monoxide and other low molecular weight hydrocarbons. Chromium oxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE O-TO 3000 B-1 CHROME COATING known by?
BONDERITE O-TO 3000 B-1 CHROME COATING is also known as: PASSERITE 3000 B-1
What is the hazard signal word for BONDERITE O-TO 3000 B-1 CHROME COATING?
The signal word is danger.
What is the physical form of BONDERITE O-TO 3000 B-1 CHROME COATING?
BONDERITE O-TO 3000 B-1 CHROME COATING is a liquid with yellow color. It has acrylic odor.
What is the solubility of BONDERITE O-TO 3000 B-1 CHROME COATING?
Complete
What is BONDERITE O-TO 3000 B-1 CHROME COATING used for?
Passivating agent
What are the hazard statements for BONDERITE O-TO 3000 B-1 CHROME COATING?
This substance has 7 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H340: MAY CAUSE GENETIC DEFECTS.
- H350: MAY CAUSE CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE O-TO 3000 B-1 CHROME COATING?
The melting point is Not determined and the boiling point is 100 °C (212°F) calculated.