Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK AE 4326 known as HYSOL AE4326 GAL A3
- Product Code
- 538081
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy resin
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 60 - 80% | Yes |
| Allyl 2,3-epoxypropyl ether | 106-92-3 | 5 - 10% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | Yes |
Notes
*Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.
Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Seek medical attention immediately (for eye contact). Seek immediate medical attention (for ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Keep unnecessary personnel away.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE STYCAST ES 4412 PTB known as HYSOL ES4412 PART B GAL
---
LOCTITE ABLESTIK ABL 2100A
---
LOCTITE ABLESTIK 84-3J
---
LOCTITE ABLESTIK 8600
---
LOCTITE STYCAST EB 4322 known as HYSOL EB4322 GAL EU FR&GER/VISH
---
LOCTITE ABLESTIK 2100AS
---
LOCTITE ABLESTIK 2053S
---
LOCTITE STYCAST HD 3719 known as HYSOL HD3719 GAL
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Remove all sources of ignition. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Wear suitable protective clothing, safety glasses and gloves. See Section 8 of the SDS for Personal Protective Equipment. When using do not eat, drink or smoke. Keep container closed.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store in a dry place. Avoid moisture. Keep away from heat, spark and flame. Store in original container until ready to use.
Wash thoroughly after handling. When using do not eat, drink or smoke.
Remove all sources of ignition. Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
High temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials. Avoid static discharge. Protect from direct sunlight.
Strong oxidizing agents. Strong acids and strong bases. Strong alkalis. Amines.
Oxides of carbon. Acetic acid Formaldehyde Irritating vapors. Phenolics. Toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Bisphenol-A Epichlorhydrin resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK AE 4326 known as HYSOL AE4326 GAL A3?
The signal word is danger.
What is the physical form of LOCTITE ABLESTIK AE 4326 known as HYSOL AE4326 GAL A3?
LOCTITE ABLESTIK AE 4326 known as HYSOL AE4326 GAL A3 is a liquid with black color. It has aromatic odor.
What is the solubility of LOCTITE ABLESTIK AE 4326 known as HYSOL AE4326 GAL A3?
Insoluble Water
What is LOCTITE ABLESTIK AE 4326 known as HYSOL AE4326 GAL A3 used for?
Epoxy resin
What are the hazard statements for LOCTITE ABLESTIK AE 4326 known as HYSOL AE4326 GAL A3?
This substance has 6 hazard statements:
- H227: COMBUSTIBLE LIQUID.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE ABLESTIK AE 4326 known as HYSOL AE4326 GAL A3?
The melting point is Not determined and the boiling point is > 260 °C (> 500°F).