Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE TCF 3000 PFH known as POWERFILM PF-H 23.5H X 11.50
- Product Code
- 995609 / PF-H235H1150
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Phase Change Thermal Interface Material (PCTIM)
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Graphite | 7782-42-5 | 10 - 30% | Yes |
| Filler | --- | 0.1 - 1% | Yes |
IDH number: 995609 Product name: LOCTITE TCF 3000 PFH known as POWERFILM PF-H 23.5H X 11.50
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
Get medical attention if symptoms develop and persist.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide. Use extinguishing measures appropriate to local circumstances and the surrounding environment.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray. Keep unnecessary personnel away.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
If product is spilled in the solid state, pick up and place in an appropriate waste disposal container. If product is spilled in the molten state, allow product to solidify before scraping up and disposing of in an appropriate waste disposal container.
Related Products
Similar products with comparable safety profiles
LOCTITE TCF 2000 AFH known as Power 2 Mil Roll 0.5H x 0.5B
---
LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345
---
LOCTITE TCF 2000
---
LOCTITE ABLESTIK CF 3352-0075 known as Ablefilm CF3352-0075
---
LOCTITE ABLESTIK ECF 550X-1-008 known as ABLEFILM ECF550X-1-008
---
LOCTITE ABLESTIK ECF 550X-1-005 known as Ablefilm ECF550X-1-005
---
LOCTITE ABLESTIK ECF 571-002 known as Ablefilm ECF571-002(5011),10x12
---
LOCTITE ABLESTIK ECF 550X-1-005 known as Ablefilm ECF550X-1-005, 12x12
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Remove all sources of ignition. Use only with adequate ventilation. When using do not eat, drink or smoke. See Section 8 of the SDS for Personal Protective Equipment. Avoid contact with eyes, skin and clothing. Avoid breathing dust. Keep container closed. Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
When using do not eat, drink or smoke. Wash thoroughly after handling.
Remove all sources of ignition. Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.
Strong acids, alkalies and oxidizing agents.
Oxides of carbon. Oxides of nitrogen. Oxides of aluminum. Hydrocarbons. Irritating organic fragments.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE TCF 3000 PFH known as POWERFILM PF-H 23.5H X 11.50?
The signal word is no signal word.
What is the physical form of LOCTITE TCF 3000 PFH known as POWERFILM PF-H 23.5H X 11.50?
LOCTITE TCF 3000 PFH known as POWERFILM PF-H 23.5H X 11.50 is a solid with black color. It has odourless / odorless odor.
What is the solubility of LOCTITE TCF 3000 PFH known as POWERFILM PF-H 23.5H X 11.50?
Insoluble Water
What is LOCTITE TCF 3000 PFH known as POWERFILM PF-H 23.5H X 11.50 used for?
Phase Change Thermal Interface Material (PCTIM)
What are the hazard statements for LOCTITE TCF 3000 PFH known as POWERFILM PF-H 23.5H X 11.50?
This substance has 1 hazard statement:
- NOT CLASSIFIED. READ ENTIRE SAFETY DATA SHEET.
What is the melting point of LOCTITE TCF 3000 PFH known as POWERFILM PF-H 23.5H X 11.50?
The melting point is Not available. and the boiling point is Not available..