Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345
- Product Code
- AG-532-345
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Phase Change Thermal Interface Material (PCTIM)
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
Seek medical attention immediately (for eye contact).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide. Use extinguishing measures appropriate to local circumstances and the surrounding environment.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Remove all sources of ignition. Ensure adequate ventilation. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Wear suitable protective clothing, gloves and eye/face protection. If product is spilled in the solid state, pick up and place in an appropriate waste disposal container. If product is spilled in the molten state, allow product to solidify before scraping up and disposing of in an appropriate waste disposal container. Avoid dust formation.
Materials: appropriate waste disposal container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not taste or swallow. Avoid breathing vapors or mists of this product. Keep container closed.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
When using do not eat, drink or smoke. Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
Will not occur.
Heat, flames, sparks and other sources of ignition. Store away from incompatible materials. Exposure to moisture.
Strong acids, alkalies and oxidizing agents. Fluorine. Chlorine trifluoride. Halogenated compounds. Water.
Oxides of carbon. Oxides of nitrogen. Oxides of sulfur. Metal oxide fumes. Hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345?
The signal word is warning.
What is the physical form of LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345?
LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345 is a solid (coated aluminum foil substrate) with black color. It has odourless / odorless odor.
What is the solubility of LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345?
Negligible Water
What is LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345 used for?
Phase Change Thermal Interface Material (PCTIM)
What are the hazard statements for LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345?
This substance has 2 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H351: SUSPECTED OF CAUSING CANCER.
What is the melting point of LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345?
The melting point is 51 °C (123.8 °F) (coating compound); 482 °C (899.6 °F) (aluminum substrate) and the boiling point is Not available..