Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE TCF 2000 AFH known as Power 2 Mil Roll 0.5H x 0.5B
- Product Code
- AF-S-05H-05B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Phase Change Thermal Interface Material (PCTIM)
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The data for this section has not been processed yet.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
Seek medical attention immediately (for eye contact). If symptoms develop and persist, get medical attention (for inhalation, skin contact, ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide. Use extinguishing measures appropriate to local circumstances and the surrounding environment.
Not available.
In case of fire, keep containers cool with water spray.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
If product is spilled in the solid state, pick up and place in an appropriate waste disposal container. If product is spilled in the molten state, allow product to solidify before scraping up and disposing of in an appropriate waste disposal container.
Related Products
Similar products with comparable safety profiles
LOCTITE TCF 1000ALH
---
LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345
---
LOCTITE ECCOBOND LCM 1000AF
---
LOCTITE CF 3352-0075 4.700" X 3.475"
---
LOCTITE C 400 96SC 5C 0.5MM G
---
LOCTITE BONDACE 232HF-2
---
LOCTITE ECCOBOND FP4802 10CCMU
---
LOCTITE ABLESTIK CF 3350-004 5.895" X 5.302"
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Avoid contact with eyes, skin and clothing. Do not taste or swallow. Do not inhale vapors and fumes. When using do not eat, drink or smoke. Keep container closed. Wash thoroughly after handling.
Store between -20 °C (-4°F) and 50 °C (122°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
When using do not eat, drink or smoke. Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
Will not occur.
Exposure to moisture. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.
Strong acids, alkalies and oxidizing agents. Halogenated compounds. Water.
Oxides of carbon. Metal oxide fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE TCF 2000 AFH known as Power 2 Mil Roll 0.5H x 0.5B?
The signal word is no signal word.
What is the physical form of LOCTITE TCF 2000 AFH known as Power 2 Mil Roll 0.5H x 0.5B?
LOCTITE TCF 2000 AFH known as Power 2 Mil Roll 0.5H x 0.5B is a solid (coated aluminum foil substrate) with black color.
What is the solubility of LOCTITE TCF 2000 AFH known as Power 2 Mil Roll 0.5H x 0.5B?
Negligible Water
What is LOCTITE TCF 2000 AFH known as Power 2 Mil Roll 0.5H x 0.5B used for?
Phase Change Thermal Interface Material (PCTIM)
What is the melting point of LOCTITE TCF 2000 AFH known as Power 2 Mil Roll 0.5H x 0.5B?
The melting point is 51 °C (123.8 °F) (coating compound); 482 °C (899.6 °F) (aluminum substrate) and the boiling point is Not available..