Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BERGQUIST GAP FILLER TGP 1500RW known as Loctite TGF 1500RW
- Product Code
- 2270427
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Thermal Conductive Material
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aluminium oxide - non fibrous form | 1344-28-1 | 80 - 100
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Aluminium oxide - non fibrous form | 1344-28-1 | 80 - 100% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide. Use extinguishing measures appropriate to local circumstances and the surrounding environment.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed container until ready for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE BERGQUIST GAP PAD TGP 1000VOUS
---
LOCTITE PC 7257 B known as LOCTITE FIXMAST MAGROUT 1GA PTB
---
LOCTITE PC 7257 B known as LOCTITE FIXMAST MAGROUT 5GA PTB
---
LOCTITE SI 598 BK known as Loctite SI 598 BK TB95GCH
---
LOCTITE EA 7363 B known as FIXMASTER ANC BLT GRT HP 4.5OZB
---
LOCTITE TCF 2000 AG known as Powerstrate 60 AG-532-345
---
LOCTITE 121078 BO250ML EGFD
---
LOCTITE 3220W known as LOCTITE 3220W 55CC(-20) E/C/J
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
High temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.
Strong acids, alkalies and oxidizing agents. Chlorinated rubber.
Oxides of carbon. Oxides of sulfur. Oxides of silicon. Formaldehyde. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BERGQUIST GAP FILLER TGP 1500RW known as Loctite TGF 1500RW?
The signal word is no signal word.
What is the physical form of BERGQUIST GAP FILLER TGP 1500RW known as Loctite TGF 1500RW?
BERGQUIST GAP FILLER TGP 1500RW known as Loctite TGF 1500RW is a liquid with light yellow color. It has odorless odor.
What is the solubility of BERGQUIST GAP FILLER TGP 1500RW known as Loctite TGF 1500RW?
Not available.
What is BERGQUIST GAP FILLER TGP 1500RW known as Loctite TGF 1500RW used for?
Thermal Conductive Material
What is the melting point of BERGQUIST GAP FILLER TGP 1500RW known as Loctite TGF 1500RW?
The melting point is Not available. and the boiling point is Not available..