Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ED 1000 AERO known as ANOSEAL 1000
- Product Code
- 593823
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for industrial surface treatment
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Nickel compound | 373-02-4 | 10 - 30% | Yes |
| Benzene, 1,1'-oxybis-, tetrapropylene derivs., sulfonated, sodium salts | 119345-04-9 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately remove soiled or soaked clothing. Wash with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Seek medical advice. DO NOT induce vomiting unless directed to do so by medical personnel.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container.
Materials: inert absorbent such as sand or vermiculite
Related Products
Similar products with comparable safety profiles
BONDERITE M-ED SEAL 9000 ANODIZING SEAL known as ANOSEAL 9000
---
BONDERITE S-ST 9100 AERO
---
BONDERITE M-CR 1500 AERO known as ALODINE 1500
---
BONDERITE S-ST 6930 AERO
---
BONDERITE M-ED SEAL 1085
---
BONDERITE M-CR 1201 AERO known as ALODINE 1201
---
BONDERITE S-ST 6813E AERO
---
BONDERITE M-CR 1132 M AERO
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only. Mix well before using.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing, freezing temperature is <=32F (<=0C). Ship and store above 50 °F.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
None identified.
This product may react with strong oxidizing agents. Keep away from alkalis.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Nickel di(acetate))
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-ED 1000 AERO known as ANOSEAL 1000?
The signal word is danger.
What is the physical form of BONDERITE M-ED 1000 AERO known as ANOSEAL 1000?
BONDERITE M-ED 1000 AERO known as ANOSEAL 1000 is a liquid with light green color. It has sour/acid odor.
What is the solubility of BONDERITE M-ED 1000 AERO known as ANOSEAL 1000?
Complete Water
What is BONDERITE M-ED 1000 AERO known as ANOSEAL 1000 used for?
Product for industrial surface treatment
What are the hazard statements for BONDERITE M-ED 1000 AERO known as ANOSEAL 1000?
This substance has 7 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H350: MAY CAUSE CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE M-ED 1000 AERO known as ANOSEAL 1000?
The melting point is Not applicable, Product is a liquid and the boiling point is > 101.7 °C (> 215.1 °F) calculated.