NextSDS Logo
Safety Data Sheet EN

TEROSON MS 9371B WH known as TEROSTAT MS 9371B 25KG EN/CH

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON MS 9371B WH known as TEROSTAT MS 9371B 25KG EN/CH
Product Code
45014

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hardener

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2B
STOT RE Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN AND EYE IRRITATION.
H372 MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P260 Do not breathe dust or fumes.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314 Get medical attention if you feel unwell.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P352 IF ON SKIN: Wash with plenty of water.
P362 Take off contaminated clothing.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

Chemical Name CAS Number Concentration Hazardous
Poly[oxy(methyl-1,2-ethanediyl)], a,a',a"-1,2,3-propanetriyltris[w-hydroxy- 25791-96-2 30 - 60% Yes
Calcium carbonate 471-34-1 30 - 60% Yes
Ethylene glycol 107-21-1 1 - 5% Yes

IDH number: 1470341 Product name: TEROSON MS 9371B WH known as TEROSTAT MS 9371B 25KG EN/CH

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

Never give anything by mouth to an unconscious person. Get medical attention.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. For industrial use only. Do not take internally.

Storage

For safe storage, store at or below 40 °C (104°F) Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep in a cool, well ventilated area away from heat, sparks and open flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Density
---
Explosive Limits
---
Dynamic Viscosity
80.00 - 120.00 mPa.s
Kinematic Viscosity
---
Decomposition Temperature
---
Colour Intensity
---
Properties Status
---
Evaporation Rate
---
Boiling Point
---
Solubility In Water
Insoluble
Auto Ignition Temperature
Not applicable
Softening Point
---
Lower Explosive Limit
---
Molecular Weight
---
Colour
White
State Under Standard Conditions
---
Odor Threshold
Not available.
Relative Density
1.26 - 1.36
Solidification Point
---
Odor
Slight
Form
---
Freezing Point
---
Upper Explosive Limit
---
Appearance
---
Flash Point
> 93 °C (> 199.4 °F)
Partition Coefficient
Not available.
Ph
7 - 8
Relative Evaporation Rate
---
Flammability
Not applicable
Bulk Density
---
Voc Content
< 4 % Estimated
Crystallisation Point
---
Metal Corrosion
---
Solubility In Fat
---
Cloud Point
---
Density
---
Solubility
---
Vapor Pressure
---
Melting Point
---
Physical State Data
liquid
Physical State
Solid
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Elevated temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.

Incompatible

Strong oxidizing agents. Strong reducing agents. Strong acids and strong bases.

Decomposition

Oxides of carbon. Oxides of nitrogen. Irritating organic vapours.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON MS 9371B WH known as TEROSTAT MS 9371B 25KG EN/CH?

The signal word is warning.

What is the physical form of TEROSON MS 9371B WH known as TEROSTAT MS 9371B 25KG EN/CH?

TEROSON MS 9371B WH known as TEROSTAT MS 9371B 25KG EN/CH is a solid with white color. It has slight odor.

What is TEROSON MS 9371B WH known as TEROSTAT MS 9371B 25KG EN/CH used for?

Hardener

What are the hazard statements for TEROSON MS 9371B WH known as TEROSTAT MS 9371B 25KG EN/CH?

This substance has 2 hazard statements:

  • H315: CAUSES SKIN AND EYE IRRITATION.
  • H372: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.