Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-PD 2491 DEFOAMER ADDITIVE known as P3 DEFOAMER 2491
- Product Code
- 772513
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Defoamer
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy naphthenic <3%DMSO | 64742-52-5 | 60 - 80% | Yes |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic < 3%DMSO | 64742-65-0 | 10 - 30% | Yes |
| Tall oil fatty acids, ethoxylated | 61791-00-2 | 1 - 5% | Yes |
| Treated fumed silica | 67762-90-7 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Immediately flush skin with plenty of water (using soap, if available).
Immediately flush eyes with plenty of water for at least 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Surfaces may become slippery after spillage.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
BONDERITE C-AD DEFOAMER CLEANER ADDITIVE known as PARCO DEFOAMER 2482
---
BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE
---
BONDERITE C-AD DEFOAMER 220 LUBRICANT ADDITIVE
---
BONDERITE L-AD DEFOAMER LUBRICANT ADDITIVE ACHESON known as DTI DEFOAMER
---
BONDERITE S-PD 2430
---
BONDERITE S-MA 2452 known as P3 BAFFLE COATING 2452
---
BONDERITE L-AD DFM 21 known as NOVA D-FOAM 21
---
BONDERITE M-AD 319 PRETREATMENT ADDITIVE known as ADDITIVE 319
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin and eye contact. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Do not take internally. For industrial use only.
Store at or below 120 °F (48.9 °C). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Thermal decomposition may produce formaldehyde.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-PD 2491 DEFOAMER ADDITIVE known as P3 DEFOAMER 2491?
The signal word is danger.
What is the physical form of BONDERITE S-PD 2491 DEFOAMER ADDITIVE known as P3 DEFOAMER 2491?
BONDERITE S-PD 2491 DEFOAMER ADDITIVE known as P3 DEFOAMER 2491 is a liquid with light yellow color. It has petroleum odor.
What is the solubility of BONDERITE S-PD 2491 DEFOAMER ADDITIVE known as P3 DEFOAMER 2491?
Disperses in water as emulsion Water
What is BONDERITE S-PD 2491 DEFOAMER ADDITIVE known as P3 DEFOAMER 2491 used for?
Defoamer
What are the hazard statements for BONDERITE S-PD 2491 DEFOAMER ADDITIVE known as P3 DEFOAMER 2491?
This substance has 1 hazard statement:
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
What is the melting point of BONDERITE S-PD 2491 DEFOAMER ADDITIVE known as P3 DEFOAMER 2491?
The melting point is Not determined and the boiling point is 485 °F (251.7 °C).