Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-MA 2452 known as P3 BAFFLE COATING 2452
- Product Code
- 592920
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Strippable protective paint coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Solvent naphtha (petroleum), medium aliph. | 64742-88-7 | 10 - 30% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
For skin contact, flush with large amounts of water. Seek immediate medical attention.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Seek medical advice. Do not induce vomiting.
Immediate Medical Attention
Seek immediate medical attention for skin contact. Seek medical attention at once for eye contact.
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Vapors are heavier than air and may travel to ignition sources and flash back. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full. Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-MA 2451 known as PARCO BAFFLE COAT 2451
---
BONDERITE M-PA 5412-A
---
BONDERITE S-PD 2430
---
BONDERITE M-NT 8453 CONVERSION COATING
---
BONDERITE S-FN 6750 CORROSION PROTECTIVE COATING
---
BONDERITE S-FN 6750 CORROSION PROTECTIVE COATING known as P3-prevox 6750 KN30*RWE
---
BONDERITE M-NT 1455T CONVERSION COATING
---
BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition; they may explode.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, spark and flame.
This product may react with oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1268
- Shipping Name
- Petroleum products, n.o.s. (Solvent naphtha)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-MA 2452 known as P3 BAFFLE COATING 2452?
The signal word is danger.
What is the physical form of BONDERITE S-MA 2452 known as P3 BAFFLE COATING 2452?
BONDERITE S-MA 2452 known as P3 BAFFLE COATING 2452 is a liquid with blue color. It has mild odor.
What is the solubility of BONDERITE S-MA 2452 known as P3 BAFFLE COATING 2452?
practically insoluble Water
What is BONDERITE S-MA 2452 known as P3 BAFFLE COATING 2452 used for?
Strippable protective paint coating
What are the hazard statements for BONDERITE S-MA 2452 known as P3 BAFFLE COATING 2452?
This substance has 5 hazard statements:
- H226: FLAMMABLE LIQUID AND VAPOUR.
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of BONDERITE S-MA 2452 known as P3 BAFFLE COATING 2452?
The melting point is Not determined and the boiling point is 319 °F (159.4 °C).